297abffd67
Add PC-relative branch instructions to moxie port.
2009-06-11 11:27:57 +00:00
c05f7ba26e
Print moxie addresses nicely.
2009-06-06 13:02:21 +00:00
cc0748930b
Add new binutils target: moxie
2009-04-16 15:39:46 +00:00
93c75f41e4
[bfd]
...
* elf32-h8300.c (elf32_h8_relax_section): Relax MOVA opcodes.
[gas]
* tc-h8300.c (do_a_fix_imm): Pass the insn, force relocs for MOVA
immediates.
(build_bytes): Pass insn to do_a_fix_imm.
[include/opcode]
* h8300.h: Add relaxation attributes to MOVA opcodes.
2009-04-07 18:21:21 +00:00
926aac359f
include/opcode/
...
* ppc.h (ppc_parse_cpu): Declare.
opcodes/
* ppc-dis.c: Include "opintl.h".
(struct ppc_mopt, ppc_opts): New.
(ppc_parse_cpu): New function.
(powerpc_init_dialect): Use it.
(print_ppc_disassembler_options): Dump options from ppc_opts.
Internationalize message.
gas/
* config/tc-ppc.c (parse_cpu): Delete.
(md_parse_option, ppc_machine): Use ppc_parse_cpu.
gas/testsuite/
* gas/ppc/altivec_and_spe.d (objdump): Add -Maltivec.
* gas/ppc/common.d: Adjust for -Mcom not including -Mppc.
2009-03-10 06:53:45 +00:00
753a03bf8e
Add support for Score7 architecture.
2009-03-02 10:33:07 +00:00
c636f27d48
gas/
...
* config/tc-ppc.c (pre_defined_registers): Add "f32" to "f63",
"f.32" to "f.63", "vs0" to "vs63" and "vs.0" to "vs.63".
(parse_cpu): Extend -mpower7 to accept power7 and isel instructions.
gas/testsuite/
* gas/ppc/e500mc.d ("wait", "waitsrv", "waitimpl"): Add tests.
* gas/ppc/e500mc.s: Likewise.
* gas/ppc/power6.d ("cdtbcd", "cbcdtd", "addg6s"): Add tests.
* gas/ppc/power6.s: Likewise.
* gas/ppc/power7.d ("lfdpx", "mffgpr", "mftgpr"): Remove invalid tests.
("wait", "waitsrv", "waitimpl", "divwe", "divwe.", "divweo", "divweo.",
"divweu", "divweu.", "divweuo", "divweuo.", "bpermd", "popcntw",
"popcntd", "ldbrx", "stdbrx", "lfiwzx", "lfiwzx", "fcfids", "fcfids.",
"fcfidus", "fcfidus.", "fctiwu", "fctiwu.", "fctiwuz", "fctiwuz.",
"fctidu", "fctidu.", "fctiduz", "fctiduz.", "fcfidu", "fcfidu.",
"ftdiv", "ftdiv", "ftsqrt", "ftsqrt", "dcbtt", "dcbtstt", "dcffix",
"dcffix.", "lbarx", "lbarx", "lbarx", "lharx", "lharx", "lharx",
"stbcx.", "sthcx.", "fre", "fre.", "fres", "fres.", "frsqrte",
"frsqrte.", "frsqrtes", "frsqrtes.", "isel"): Add tests.
* gas/ppc/power7.s: Likewise.
* gas/ppc/vsx.d: New test.
* gas/ppc/vsx.s: Likewise.
* gas/ppc/ppc.exp: Run it.
include/opcode/
* ppc.h (PPC_OPCODE_POWER7): New.
opcodes/
* ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
the power7 and the isel instructions.
* ppc-opc.c (insert_xc6, extract_xc6): New static functions.
(insert_dm, extract_dm): Likewise.
(XB6): Update comment to include XX2 form.
(WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
(RemoveXX3DM): Delete.
(powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
"mftgpr">: Deprecate for POWER7.
<"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
"frsqrte.">: Deprecate the three operand form and enable the two
operand form for POWER7 and later.
<"wait">: Extend to accept optional parameter. Enable for POWER7.
<"waitsrv", "waitimpl">: Add extended opcodes.
<"ldbrx", "stdbrx">: Enable for POWER7.
<"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
<"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
"divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
"divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
"divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
"fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
"fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
"lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
<"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
"stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
"xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
"xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
"xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
"xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
"xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
"xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
"xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
"xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
"xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
"xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
"xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
"xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
"xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
"xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
"xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
"xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
"xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
"xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
"xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
"xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
"xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
"xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
"xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
"xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
"xxspltw", "xxswapd">: Add VSX opcodes.
2009-02-26 22:07:33 +00:00
eea6c2c9c3
* i386.h: Add comment regarding sse* insns and prefixes.
2009-02-06 23:14:34 +00:00
0462e8847a
bfd:
...
2009-02-03 Sandip Matte <sandip@rmicorp.com>
* aoutx.h (NAME (aout, machine_type)): Handle bfd_mach_mips_xlr.
* archures.c (bfd_mach_mips_xlr): Define.
* bfd-in2.h: Regenerate.
* cpu-mips.c (I_xlr): Define.
(arch_info_struct): Add XLR entry.
* elfxx-mips.c (_bfd_elf_mips_mach): Handle E_MIPS_MACH_XLR.
(mips_set_isa_flags): Handle bfd_mach_mips_xlr
(mips_mach_extensions): Add XLR entry.
binutils:
2009-02-03 Sandip Matte <sandip@rmicorp.com>
* readelf.c (get_machine_flags): Handle E_MIPS_MACH_XLR.
gas:
2009-02-03 Sandip Matte <sandip@rmicorp.com>
* config/tc-mips.c (macro): Handle M_MSGSND, M_MSGLD, M_MSGLD_T,
M_MSGWAIT and M_MSGWAIT_T.
(mips_cpu_info_table): Add XLR entry.
* doc/c-mips.texi (-march): Document xlr.
gas/testsuite:
2009-02-03 Sandip Matte <sandip@rmicorp.com>
* gas/mips/mips.exp (xlr): New architecture.
(xlr-ext): Run test.
* gas/mips/xlr-ext.d, gas/mips/xlr-ext.s: New.
include/elf:
2009-02-03 Sandip Matte <sandip@rmicorp.com>
* mips.h (E_MIPS_MACH_XLR): Define.
include/opcode:
2009-02-03 Sandip Matte <sandip@rmicorp.com>
* mips.h (INSN_XLR): Define.
(INSN_CHIP_MASK): Update.
(CPU_XLR): Define.
(OPCODE_IS_MEMBER): Update.
(M_MSGSND, M_MSGLD, M_MSGLD_T, M_MSGWAIT, M_MSGWAIT_T): Define.
opcodes:
2009-02-03 Sandip Matte <sandip@rmicorp.com>
* mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
(mips_arch_choices): Add XLR entry.
* mips-opc.c (XLR): Define.
(mips_builtin_opcodes): Add XLR instructions.
2009-02-03 18:16:04 +00:00
9c87160882
fix typo in previous entry
2009-01-29 00:37:12 +00:00
88db8cbb6a
* opcode/i386.h: Add multiple inclusion protection.
...
(EAX_REG_NUM,ECX_REG_NUM,EDX_REGNUM,EBX_REG_NUM,ESI_REG_NUM)
(EDI_REG_NUM): New macros.
(MODRM_MOD_FIELD,MODRM_REG_FIELD,MODRM_RM_FIELD): New macros.
(SIB_SCALE_FIELD,SIB_INDEX_FIELD,SIB_BASE_FIELD): New macros.
(REG_PREFIX_P): New macro.
* amd64-tdep.h (amd64_displaced_step_copy_insn): Declare.
(amd64_displaced_step_fixup): Declare.
* amd64-tdep.c: #include opcode/i386.h, dis-asm.h.
(amd64_arch_regmap): Move out of amd64_analyze_stack_align
and make static global.
(amd64_arch_regmap_len): New static global.
(amd64_arch_reg_to_regnum): New function.
(struct amd64_insn): New struct.
(struct displaced_step_closure): New struct.
(onebyte_has_modrm,twobyte_has_modrm): New static globals.
(rex_prefix_p,skip_prefixes)
(amd64_insn_length_fprintf,amd64_insn_length_init_dis)
(amd64_insn_length,amd64_get_unused_input_int_reg)
(amd64_get_insn_details,fixup_riprel,fixup_displaced_copy)
(amd64_displaced_step_copy_insn)
(amd64_absolute_jmp_p,amd64_absolute_call_p,amd64_ret_p)
(amd64_call_p,amd64_breakpoint_p,amd64_syscall_p)
(amd64_displaced_step_fixup): New functions.
* amd64-linux-tdep.c: #include arch-utils.h.
(amd64_linux_init_abi): Install displaced stepping support.
* gdb.arch/amd64-disp-step.S: New file.
* gdb.arch/amd64-disp-step.exp: New file.
* gdb.arch/i386-disp-step.S: New file.
* gdb.arch/i386-disp-step.exp: New file.
2009-01-29 00:29:53 +00:00
91d9410bd0
gas/
...
* config/tc-ppc.c (ppc_setup_opcodes): Remove PPC_OPCODE_NOPOWER4 test.
Test the new "deprecated" opcode field.
include/opcode/
* ppc.h (struct powerpc_opcode): New field "deprecated".
(PPC_OPCODE_NOPOWER4): Delete.
opcodes/
* ppc-opc.c (PPCNONE): Define.
(NOPOWER4): Delete.
(powerpc_opcodes): Initialize the new "deprecated" field.
2009-01-09 18:50:57 +00:00
6e40cdfc86
* aoutx.h (NAME): Add case statements for bfd_mach_mips14000,
...
bfd_mach_mips16000.
* archures.c (bfd_architecture): Add .#defines for bfd_mach_mips14000,
bfd_mach_mips16000.
* bfd-in2.h: Regenerate.
* cpu-mips.c: Add enums I_mips14000, I_mips16000.
(arch_info_struct): Add refs to R14000, R16000.
* elfxx-mips.c (mips_set_isa_flags): Handle bfd_mach_mips14000,
bfd_mach_mips16000.
(mips_mach_extensions): Map R14000, R16000 to R10000.
* config/tc-mips.c (hilo_interlocks): Handle CPU_R14000, CPU_R16000.
(mips_cpu_info_table): Add r14000, r16000.
* doc/c-mips.texi: Add entries for 14000, 16000.
* mips-dis.c (mips_arch_choices): Add r14000, r16000.
* mips.h: Define CPU_R14000, CPU_R16000.
(OPCODE_IS_MEMBER): Include R14000, R16000 in test.
2008-11-28 18:02:17 +00:00
b1230ddef7
Add support for ARM half-precision conversion instructions.
2008-11-18 15:45:05 +00:00
5dd0d5828f
2008-11-06 Chao-ying Fu <fu@mips.com>
...
* mips.h: Doucument '1' for 5-bit sync type.
2008-11-06 19:32:42 +00:00
ecaf487248
gas/
...
2008-08-28 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-ia64.c (CR_IIB0): New.
(CR_IIB1): Likewise.
(cr): Add cr.iib0 and cr.iib1.
(specify_resource): Handle IA64_RS_CR_IIB and CR_IIB0/CR_IIB1.
gas/testsuite/
2008-08-28 H.J. Lu <hongjiu.lu@intel.com>
* gas/ia64/dv-raw-err.s: Add tests for cr.iib0 and cr.iib1.
* gas/ia64/dv-waw-err.s: Likewise.
* gas/ia64/regs.s: Likewise.
* gas/ia64/dv-raw-err.l: Updated.
* gas/ia64/dv-waw-err.l: Likewise.
* gas/ia64/regs.d: Likewise.
include/opcode/
2008-08-28 H.J. Lu <hongjiu.lu@intel.com>
* ia64.h (ia64_resource_specifier): Add IA64_RS_CR_IIB. Update
IA64_RS_CR.
opcodes/
2008-08-28 H.J. Lu <hongjiu.lu@intel.com>
* ia64-dis.c (print_insn_ia64): Handle cr.iib0 and cr.iib1.
* ia64-gen.c (lookup_specifier): Likewise.
* ia64-ic.tbl: Add support for cr.iib0 and cr.iib1.
* ia64-raw.tbl: Likewise.
* ia64-waw.tbl: Likewise.
* ia64-asmtab.c: Regenerated.
2008-08-28 14:07:48 +00:00
a15b3bdef7
Add AVR architectures avr25, avr31, avr35, and avr51 to match GCC.
...
bfd/
* archures.c (bfd_mach_avr25, bfd_mach_avr31, bfd_mach_avr35,
bfd_mach_avr51): New.
* bfd-in2.h: Regenerate.
* cpu-avr.c (arch_info_struct): Add avr25, avr31, avr35, and avr51
architectures. Change comments to match architecture comments in GCC.
(compatible): Add test for new AVR architectures.
* elf32-avr.c (bfd_elf_avr_final_write_processing): Recognize
bfd_mach_avr25, bfd_mach_avr31, bfd_mach_avr35 and bfd_mach_avr51.
(elf32_avr_object_p): Recognize E_AVR_MACH_AVR25, E_AVR_MACH_AVR31,
E_AVR_MACH_AVR35 and E_AVR_MACH_AVR51.
gas/
* config/tc-avr.c (mcu_types): Add avr25, avr31, avr35, and avr51
architectures. Reorganize list to put mcu types in correct architectures
and to order list same as in GCC. Use new ISA definitions in
include/opcode/avr.h.
* doc/c-avr.texi: Add avr25, avr31, avr35, and avr51 architecture
descriptions. Reorganize descriptions to put mcu types in correct
architectures and to order lists same as in GCC.
include/
* elf/avr.h (E_AVR_MACH_AVR25, E_AVR_MACH_AVR31,
E_AVR_MACH_AVR35, E_AVR_MACH_AVR51): Define.
(EF_AVR_MACH): Redefine to 0x7F.
* opcode/avr.h (AVR_ISA_TINY3, AVR_ISA_ALL, AVR_ISA_USB162): Remove.
(AVR_ISA_AVR3): Redefine.
(AVR_ISA_AVR1, AVR_ISA_AVR2, AVR_ISA_AVR31, AVR_ISA_AVR35,
AVR_ISA_AVR3_ALL, AVR_ISA_AVR4, AVR_ISA_AVR5, AVR_ISA_AVR51,
AVR_ISA_AVR6): Define.
ld/
* Makefile.am (ALL_EMULATIONS): Add eavr25.o, eavr31.o, eavr35.o,
and eavr51.o.
Add rules for eavr25.c, eavr31.c, eavr35.c, eavr51.c.
* Makefile.in: Regenerate.
* configure.tgt (avr-*-*, targ_extra_emuls): Add avr25, avr31, avr35
and avr51.
* emulparams/avr25.sh: New file.
* emulparams/avr31.sh: New file.
* emulparams/avr35.sh: New file.
* emulparams/avr51.sh: New file.
2008-08-09 05:35:13 +00:00
b5bffab8d3
gas/
...
* config/tc-ppc.c (parse_cpu): Rename altivec_or_spe to retain_flags.
Handle -mvsx and -mpower7.
(md_show_usage): Document -mpower7 and -mvsx.
* doc/as.texinfo (Target PowerPC): Document -mvsx.
* doc/c-ppc.texi (PowerPC-Opts): Document -mvsx and -mpower7.
gas/testsuite/
* gas/ppc/power7.d: New.
* gas/ppc/power7.s: Likewise.
* gas/ppc/ppc.exp: Run power7 test.
include/opcode/
* ppc.h (PPC_OPCODE_VSX, PPC_OPERAND_VSR): New.
opcodes/
* ppc-dis.c (powerpc_init_dialect): Handle power7 and vsx options.
(print_insn_powerpc): Prepend 'vs' when printing VSX registers.
(print_ppc_disassembler_options): Document -Mpower7 and -Mvsx.
* ppc-opc.c (insert_xt6): New static function.
(extract_xt6): Likewise.
(insert_xa6): Likewise.
(extract_xa6: Likewise.
(insert_xb6): Likewise.
(extract_xb6): Likewise.
(insert_xb6s): Likewise.
(extract_xb6s): Likewise.
(XS6, XT6, XA6, XB6, XB6S, DM, XX3, XX3DM, XX1_MASK, XX3_MASK,
XX3DM_MASK, PPCVSX): New.
(powerpc_opcodes): Add opcodes "lxvd2x", "lxvd2ux", "stxvd2x",
"stxvd2ux", "xxmrghd", "xxmrgld", "xxpermdi", "xvmovdp", "xvcpsgndp".
2008-08-02 04:38:51 +00:00
79ea8bbb10
include/opcode/
...
* ppc.h (PPC_OPCODE_405): Define.
(PPC_OPERAND_FSL, PPC_OPERAND_FCR, PPC_OPERAND_UDI): Define.
gas/
* config/tc-ppc.c (parse_cpu): Separate handling of -m403/405.
(md_show_usage): Likewise.
opcodes/
* ppc-dis.c (print_insn_powerpc): Disassemble FSL/FCR/UDI fields.
* ppc-opc.c (powerpc_operands): Add Xilinx APU related operands.
(insert_sprg, PPC405): Use PPC_OPCODE_405.
(powerpc_opcodes): Add Xilinx APU related opcodes.
2008-07-30 06:29:21 +00:00
bc089f5083
include/opcode/
...
* ppc.h (ppc_cpu_t): New typedef.
(struct powerpc_opcode <flags>): Use it.
(struct powerpc_operand <insert, extract>): Likewise.
(struct powerpc_macro <flags>): Likewise.
gas/
* config/tc-ppc.c (ppc_cpu): Use ppc_cpu_t typedef.
(ppc_insert_operand): Likewise.
(ppc_machine): Likewise.
* config/tc-ppc.h: #include "opcode/ppc.h"
(struct _ppc_fix_extra <ppc_cpu>): Use ppc_cpu_t typedef.
(ppc_cpu): Update extern decl.
opcodes/
* ppc-dis.c (print_insn_powerpc): Update prototye to use new
ppc_cpu_t typedef.
(struct dis_private): New.
(POWERPC_DIALECT): New define.
(powerpc_dialect): Renamed to...
(powerpc_init_dialect): This. Update to use ppc_cpu_t and
struct dis_private.
(print_insn_big_powerpc): Update for using structure in
info->private_data.
(print_insn_little_powerpc): Likewise.
(operand_value_powerpc): Change type of dialect param to ppc_cpu_t.
(skip_optional_operands): Likewise.
(print_insn_powerpc): Likewise. Remove initialization of dialect.
* ppc-opc.c (extract_bat, extract_bba, extract_bdm, extract_bdp,
extract_bo, extract_boe, extract_fxm, extract_mb6, extract_mbe,
extract_nb, extract_nsi, extract_rbs, extract_sh6, extract_spr,
extract_sprg, extract_tbr insert_bat, insert_bba, insert_bdm,
insert_bdp, insert_bo, insert_boe, insert_fxm, insert_mb6, insert_mbe,
insert_nsi, insert_ral, insert_ram, insert_raq, insert_ras, insert_rbs,
insert_sh6, insert_spr, insert_sprg, insert_tbr): Change the dialect
param to be of type ppc_cpu_t. Update prototype.
2008-06-13 20:16:00 +00:00
dc70030aba
* mips.h: Document new field descriptors +Q.
...
(OP_SH_SEQI, OP_MASK_SEQI): New bit mask and shift count for SEQI.
opcodes/
* mips-dis.c (print_insn_args): Handle field descriptor +Q.
* mips-opc.c (mips_builtin_opcodes): Add Octeon instructions seq,
seqi, sne and snei.
gas/
* config/tc-mips.c (validate_mips_insn): Handle field descriptor +Q.
(mips_ip): Likewise.
(macro_build): Likewise.
(CPU_HAS_SEQ): New macro.
(macro2) <M_SEQ_I, M_SNE_I>: Use it. Emit seq/sne and seqi/snei.
gas/testsuite/
* gas/mips/octeon.s, gas/mips/octeon.d: Add tests for seq* and sne*.
* gas/mips/octeon-ill.s, gas/mips/octeon-ill.s: Add tests for seqi
and snei.
2008-06-12 21:44:53 +00:00
d73fd47d38
include/opcode/
...
* mips.h: Document new field descriptors +x, +X, +p, +P, +s, +S.
Update comment before MIPS16 field descriptors to mention MIPS16.
(OP_SH_BBITIND, OP_MASK_BBITIND): New bit mask and shift count for
BBIT.
(OP_SH_CINSPOS, OP_MASK_CINSPOS, OP_SH_CINSLM1, OP_MASK_CINSLM1):
New bit masks and shift counts for cins and exts.
gas/
* config/tc-mips.c (validate_mips_insn): Handle field descriptors
+x, +X, +p, +P, +s, +S.
(mips_ip): Likewise.
opcodes/
* mips-dis.c (print_insn_args): Handle field descriptors +x, +p,
+s, +S.
* mips-opc.c (mips_builtin_opcodes): Add Octeon instructions
baddu, bbit*, cins*, dmul, pop, dpop, exts*, mtm*, mtp*, syncs,
syncw, syncws, vm3mulu, vm0 and vmulu.
gas/testsuite/
* gas/mips/octeon.s, gas/mips/octeon.d: Add tests for baddu,
bbit*, cins*, dmul, pop, dpop, exts*, mtm*, mtp*, syncs, syncw,
syncws, vm3mulu, vm0 and vmulu.
* gas/mips/octeon-ill.s, gas/mips/octeon-ill.s: New test.
* gas/mips/mips.exp: Run it. Run octeon test with
run_dump_test_arches.
2008-06-12 16:14:52 +00:00
b1d07c81ca
* mips.h (INSN_MACRO): Move it up to the the pinfo macros.
...
(INSN2_M_FP_S, INSN2_M_FP_D): New pinfo2 macros.
2008-04-28 16:59:27 +00:00
7ed2b9c492
Move entries for changes in sub-directories into the changelogs in those sub-
...
directories.
2008-04-16 08:33:54 +00:00
962c961a36
ppc e500mc support
2008-04-14 11:01:38 +00:00
f47b47fb18
binutils/
...
2008-04-03 H.J. Lu <hongjiu.lu@intel.com>
* dwarf.c (dwarf_regnames_i386): Add AVX registers.
(dwarf_regnames_x86_64): Likewise.
gas/
2008-04-03 H.J. Lu <hongjiu.lu@intel.com>
* NEWS: Mention AES, CLMUL, AVX/FMA and -msse2avx.
* doc/c-i386.texi: Add avx, aes, clmul and fma to -march=.
Document -msse2avx, .avx, .aes, .clmul and .fma.
* config/tc-i386.c (YMMWORD_MNEM_SUFFIX): New.
(vex_prefix): Likewise.
(sse2avx): Likewise.
(CPU_FLAGS_ARCH_MATCH): Likewise.
(CPU_FLAGS_64BIT_MATCH): Likewise.
(CPU_FLAGS_32BIT_MATCH): Likewise.
(CPU_FLAGS_PERFECT_MATCH): Likewise.
(regymm): Likewise.
(vex_imm4): Likewise.
(fits_in_imm4): Likewise.
(build_vex_prefix): Likewise.
(VEX_check_operands): Likewise.
(bad_implicit_operand): Likewise.
(OPTION_MSSE2AVX): Likewise.
(T_YMMWORD): Likewise.
(_i386_insn): Add vex.
(cpu_arch): Add .avx, .aes, .clmul and .fma.
(cpu_flags_match): Changed to take a pointer to const template.
Enable encoding SSE instructions with VEX prefix for -msse2avx.
(match_mem_size): Also check ymmword.
(operand_type_match): Clear ymmword.
(md_begin): Allow '_' in mnemonic.
(type_names): Add OPERAND_TYPE_VEX_IMM4.
(process_immext): Update assert.
(md_assemble): Don't call process_immext if sse2avx and immext
are true. Call build_vex_prefix if vex is true.
(parse_insn): Updated for cpu_flags_match.
(swap_operands): Handle 5 operands.
(match_template): Handle 5 operands. Updated for cpu_flags_match.
Check regymm. Call VEX_check_operands. Handle YMMWORD_MNEM_SUFFIX.
(process_suffix): Handle YMMWORD_MNEM_SUFFIX.
(check_byte_reg): Check regymm.
(process_operands): Duplicate the destination register for
-msse2avx if needed.
(build_modrm_byte): Updated for instructions with VEX encoding.
(output_insn): Output VEX prefix if needed.
(md_longopts): Add msse2avx.
(md_parse_option): Handle OPTION_MSSE2AVX.
(md_show_usage): Add avx, aes, clmul, fma and -msse2avx.
(intel_e09): Support YMMWORD.
(intel_e11): Likewise.
(intel_get_token): Likewise.
gas/testsuite/
2008-04-03 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Run aes, aes-intel, x86-64-aes,
x86-64-aes-intel, avx, avx-intel, inval-avx, x86-64-avx,
x86-64-avx-intel and x86-64-inval-avx.
* gas/cfi/cfi-i386.s: Add tests for AVX register maps.
* gas/cfi/cfi-x86_64.s: Likewise.
* gas/i386/aes.d: New.
* gas/i386/aes.s: Likewise.
* gas/i386/aes-intel.d: Likewise.
* gas/i386/avx.d: Likewise.
* gas/i386/avx.s: Likewise.
* gas/i386/avx-intel.d: Likewise.
* gas/i386/clmul.d: Likewise.
* gas/i386/clmul-intel.d: Likewise.
* gas/i386/clmul.s: Likewise.
* gas/i386/i386.exp: Likewise.
* gas/i386/inval-avx.l: Likewise.
* gas/i386/inval-avx.s: Likewise.
* gas/i386/sse2avx.d: Likewise.
* gas/i386/sse2avx.s: Likewise.
* gas/i386/x86-64-aes.d: Likewise.
* gas/i386/x86-64-aes.s: Likewise.
* gas/i386/x86-64-aes-intel.d: Likewise.
* gas/i386/x86-64-avx.d: Likewise.
* gas/i386/x86-64-avx.s: Likewise.
* gas/i386/x86-64-avx-intel.d: Likewise.
* gas/i386/x86-64-clmul.d: Likewise.
* gas/i386/x86-64-clmul-intel.d: Likewise.
* gas/i386/x86-64-clmul.s: Likewise.
* gas/i386/x86-64-inval-avx.l: Likewise.
* gas/i386/x86-64-inval-avx.s: Likewise.
* gas/i386/x86-64-sse2avx.d: Likewise.
* gas/i386/x86-64-sse2avx.s: Likewise.
* gas/i386/arch-10.s: Add tests for AVX, AES, CLMUL and FMA.
* gas/i386/x86-64-arch-2.s: Likewise.
* gas/i386/rexw.s: Add AVX tests.
* gas/i386/x86-64-opcode-inval.s: Remove lds/les test.
* gas/cfi/cfi-i386.d: Updated.
* gas/cfi/cfi-x86_64.d: Likewise.
* gas/i386/arch-10.d: Likewise.
* gas/i386/arch-10-1.l: Likewise.
* gas/i386/arch-10-2.l: Likewise.
* gas/i386/arch-10-3.l: Likewise.
* gas/i386/arch-10-4.l: Likewise.
* gas/i386/rexw.d: Likewise.
* gas/i386/x86-64-arch-2.d: Likewise.
* gas/i386/x86-64-opcode-inval.d: Likewise.
* gas/i386/x86-64-opcode-inval-intel.d: Likewise.
include/opcode/
2008-04-03 H.J. Lu <hongjiu.lu@intel.com>
* i386.h (MAX_OPERANDS): Set to 5.
(MAX_MNEM_SIZE): Changed to 20.
opcodes/
2008-04-03 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (OP_E_register): New.
(OP_E_memory): Likewise.
(OP_VEX): Likewise.
(OP_EX_Vex): Likewise.
(OP_EX_VexW): Likewise.
(OP_XMM_Vex): Likewise.
(OP_XMM_VexW): Likewise.
(OP_REG_VexI4): Likewise.
(PCLMUL_Fixup): Likewise.
(VEXI4_Fixup): Likewise.
(VZERO_Fixup): Likewise.
(VCMP_Fixup): Likewise.
(VPERMIL2_Fixup): Likewise.
(rex_original): Likewise.
(rex_ignored): Likewise.
(Mxmm): Likewise.
(XMM): Likewise.
(EXxmm): Likewise.
(EXxmmq): Likewise.
(EXymmq): Likewise.
(Vex): Likewise.
(Vex128): Likewise.
(Vex256): Likewise.
(VexI4): Likewise.
(EXdVex): Likewise.
(EXqVex): Likewise.
(EXVexW): Likewise.
(EXdVexW): Likewise.
(EXqVexW): Likewise.
(XMVex): Likewise.
(XMVexW): Likewise.
(XMVexI4): Likewise.
(PCLMUL): Likewise.
(VZERO): Likewise.
(VCMP): Likewise.
(VPERMIL2): Likewise.
(xmm_mode): Likewise.
(xmmq_mode): Likewise.
(ymmq_mode): Likewise.
(vex_mode): Likewise.
(vex128_mode): Likewise.
(vex256_mode): Likewise.
(USE_VEX_C4_TABLE): Likewise.
(USE_VEX_C5_TABLE): Likewise.
(USE_VEX_LEN_TABLE): Likewise.
(VEX_C4_TABLE): Likewise.
(VEX_C5_TABLE): Likewise.
(VEX_LEN_TABLE): Likewise.
(REG_VEX_XX): Likewise.
(MOD_VEX_XXX): Likewise.
(PREFIX_0F38DB..PREFIX_0F38DF): Likewise.
(PREFIX_0F3A44): Likewise.
(PREFIX_0F3ADF): Likewise.
(PREFIX_VEX_XXX): Likewise.
(VEX_OF): Likewise.
(VEX_OF38): Likewise.
(VEX_OF3A): Likewise.
(VEX_LEN_XXX): Likewise.
(vex): Likewise.
(need_vex): Likewise.
(need_vex_reg): Likewise.
(vex_i4_done): Likewise.
(vex_table): Likewise.
(vex_len_table): Likewise.
(OP_REG_VexI4): Likewise.
(vex_cmp_op): Likewise.
(pclmul_op): Likewise.
(vpermil2_op): Likewise.
(m_mode): Updated.
(es_reg): Likewise.
(PREFIX_0F38F0): Likewise.
(PREFIX_0F3A60): Likewise.
(reg_table): Add REG_VEX_71...REG_VEX_73 and REG_VEX_AE.
(prefix_table): Add PREFIX_0F38DB..PREFIX_0F38DF, PREFIX_0F3ADF
and PREFIX_VEX_XXX entries.
(x86_64_table): Use VEX_C4_TABLE and VEX_C5_TABLE.
(three_byte_table): Use PREFIX_0F38DB..PREFIX_0F38DF and
PREFIX_0F3ADF.
(mod_table): Use VEX_C4_TABLE, VEX_C5_TABLE and VEX_LEN_TABLE.
Add MOD_VEX_XXX entries.
(ckprefix): Initialize rex_original and rex_ignored. Store the
REX byte in rex_original.
(get_valid_dis386): Handle the implicit prefix in VEX prefix
bytes and USE_VEX_LEN_TABLE/USE_VEX_C4_TABLE/USE_VEX_C5_TABLE.
(print_insn): Set need_vex/need_vex_reg/vex_i4_done to 0 before
calling get_valid_dis386. Use rex_original and rex_ignored when
printing out REX.
(putop): Handle "XY".
(intel_operand_size): Handle VEX, xmm_mode, xmmq_mode and
ymmq_mode.
(OP_E_extended): Updated to use OP_E_register and
OP_E_memory.
(OP_XMM): Handle VEX.
(OP_EX): Likewise.
(XMM_Fixup): Likewise.
(CMP_Fixup): Use ARRAY_SIZE.
* i386-gen.c (cpu_flag_init): Add CpuAES, CPU_CLMUL_FLAGS,
CPU_FMA_FLAGS and CPU_AVX_FLAGS.
(operand_type_init): Add OPERAND_TYPE_REGYMM and
OPERAND_TYPE_VEX_IMM4.
(cpu_flags): Add CpuAVX, CpuAES, CpuCLMUL and CpuFMA.
(opcode_modifiers): Add Implicit1stXmm0, Vex, Vex256, VexNDD,
VexNDS, VexW0, VexW1, Vex0F, Vex0F38, Vex0F3A, Vex3Sources,
VexImmExt and SSE2AVX.
(operand_types): Add RegYMM, Ymmword and Vex_Imm4.
* i386-opc.h (CpuAVX): New.
(CpuAES): Likewise.
(CpuCLMUL): Likewise.
(CpuFMA): Likewise.
(Vex): Likewise.
(Vex256): Likewise.
(VexNDS): Likewise.
(VexNDD): Likewise.
(VexW0): Likewise.
(VexW1): Likewise.
(Vex0F): Likewise.
(Vex0F38): Likewise.
(Vex0F3A): Likewise.
(Vex3Sources): Likewise.
(VexImmExt): Likewise.
(SSE2AVX): Likewise.
(RegYMM): Likewise.
(Ymmword): Likewise.
(Vex_Imm4): Likewise.
(Implicit1stXmm0): Likewise.
(CpuXsave): Updated.
(CpuLM): Likewise.
(ByteOkIntel): Likewise.
(OldGcc): Likewise.
(Control): Likewise.
(Unspecified): Likewise.
(OTMax): Likewise.
(i386_cpu_flags): Add cpuavx, cpuaes, cpuclmul and cpufma.
(i386_opcode_modifier): Add implicit1stxmm0, vex, vex256,
vexnds, vexndd, vexw0, vexw1, vex0f, vex0f38, vex0f3a,
vex3sources, veximmext and sse2avx.
(i386_operand_type): Add regymm, ymmword and vex_imm4.
* i386-opc.tbl: Add AES, CLMUL, AVX and FMA new instructions.
* i386-reg.tbl: Add AVX registers, ymm0..ymm15.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
2008-04-03 14:03:20 +00:00
07e2a8f376
/gas:
...
2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
* config/tc-avr.c (mcu_types): Add attiny167.
* doc/c-avr.texi: Likewise.
/include:
2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
* opcode/avr.h (AVR_ISA_TINY3): Define new opcode set for attiny167.
2008-03-28 21:51:38 +00:00
197dffcbd6
2008-03-19 Andreas Krebbel <krebbel1@de.ibm.com>
...
* opcodes/s390-mkopc.c (s390_opcode_cpu_val): S390_OPCODE_Z10 added.
(s390_cond_extensions): Reduced extensions to the compare related.
(main): z10 cpu type option added.
(expandConditionalJump): Renamed to ...
(insertExpandedMnemonic): ... this.
* opcodes/s390-opc.c: Re-group the operand format makros.
(INSTR_RIE_RRPU, INSTR_RIE_RRP0, INSTR_RIE_RUPI,
INSTR_RIE_R0PI, INSTR_RIE_RUPU, INSTR_RIE_R0PU, INSTR_RIE_R0IU,
INSTR_RIE_R0I0, INSTR_RIE_R0UU, INSTR_RIE_R0U0,
INSTR_RIE_RRUUU, INSTR_RIS_RURDI, INSTR_RIS_R0RDI, INSTR_RIS_RURDU,
INSTR_RIS_R0RDU, INSTR_RRF_U0RR, INSTR_RRF_00RR, INSTR_RRS_RRRDU,
INSTR_RRS_RRRD0, INSTR_RXY_URRD, INSTR_SIY_IRD, INSTR_SIL_RDI,
INSTR_SIL_RDU): New instruction formats added.
(MASK_RIE_RRPU, MASK_RIE_RRP0, MASK_RIE_RUPI, MASK_RIE_R0PI,
MASK_RIE_RUPU, MASK_RIE_R0PU, MASK_RIE_R0IU, MASK_RIE_R0I0,
MASK_RIE_R0UU, MASK_RIE_R0U0, MASK_RIE_RRUUU, MASK_RIS_RURDI,
MASK_RIS_R0RDI, MASK_RIS_RURDU, MASK_RIS_R0RDU, MASK_RRF_U0RR,
MASK_RRF_00RR, MASK_RRS_RRRDU, MASK_RRS_RRRD0, MASK_RXY_URRD,
MASK_SIY_IRD, MASK_SIL_RDI, MASK_SIL_RDU): New instruction format
masks added.
(s390_opformats): New formats added "ris", "rrs", "sil".
* opcodes/s390-opc.txt: Add the conditional jumps with the
extensions removed from automatic expansion in s390-mkopc.c manually.
(asi - trtre): Add new System z10 EC instructions.
* include/opcode/s390.h (s390_opcode_cpu_val): S390_OPCODE_Z10 added.
2008-03-19 Andreas Krebbel <krebbel1@de.ibm.com>
* config/tc-s390.c (md_parse_option): z10 option added.
2008-03-19 Andreas Krebbel <krebbel1@de.ibm.com>
* gas/s390/zarch-z10.d: New file.
* gas/s390/zarch-z10.s: New file.
* gas/s390/s390.exp: Run the z10 testcases.
2008-03-19 10:29:18 +00:00
3461c83a05
2008-03-09 Paul Brook <paul@codesourcery.com>
...
bfd/
* elf32-arm.c (elf32_arm_merge_eabi_attributes): Handle new
Tag_VFP_arch values.
binutils/
* readelf.c (arm_attr_tag_VFP_arch): Add "VFPv3-D16".
gas/
* config/tc-arm.c (fpu_vfp_ext_d32): New vairable.
(parse_vfp_reg_list, encode_arm_vfp_reg): Use it.
(arm_option_cpu_value): Add vfpv3-d16, vfpv2 and vfpv3.
(aeabi_set_public_attributes): Handle Tag_VFP_arch=VFPV3-D16.
* doc/c-arm.texi: Document new ARM FPU variants.
gas/testsuite/
* gas/arm/vfpv3-d16-bad.d: New test.
* gas/arm/vfpv3-d16-bad.l: New test.
include/opcode/
* arm.h (FPU_VFP_EXT_D32, FPU_VFP_V3D16, FPU_ARCH_VFP_V3D16): Define.
2008-03-09 13:23:29 +00:00
e3bf57046b
2008-03-04 Paul Brook <paul@codesourcery.com>
...
gas/
* config/tc-arm.c (arm_ext_barrier, arm_ext_msr): New.
(arm_ext_v7m): Rename...
(arm_ext_m): ... to this. Include v6-M.
(do_t_add_sub): Allow narrow low-reg non flag setting adds.
(do_t_mrs, do_t_msr, aeabi_set_public_attributes): Use arm_ext_m.
(md_assemble): Allow wide msr instructions.
(insns): Add classifications for v6-m instructions.
(arm_cpu_option_table): Add cortex-m1.
(arm_arch_option_table): Add armv6-m.
(cpu_arch): Add ARM_ARCH_V6M. Fix numbering of other v6 variants.
gas/testsuite/
* gas/arm/archv6m.d: New test.
* gas/arm/archv6m.s: New test.
* gas/arm/t16-bad.s: Test low register non flag setting add.
* gas/arm/t16-bad.l: Update expected output.
include/opcode/
* arm.h (ARM_EXT_V6M, ARM_EXT_BARRIER, ARM_EXT_THUMB_MSR): Define.
(ARM_AEXT_V6T2, ARM_AEXT_V7_ARM, ARM_AEXT_V7M): Use new flags.
(ARM_AEXT_V6M, ARM_ARCH_V6M): Define.
2008-03-05 01:31:26 +00:00
fb91cb7a41
Change accreditation for patch for PR3134
2008-02-29 14:43:17 +00:00
ca504a0dee
PR 3134
...
* h8300.h (h8_opcodes): Add an encoding for a mov.l instruction
with a 32-bit displacement but without the top bit of the 4th byte
set.
* gas/h8300/pr3134.s: New test.
* gas/h8300/pr3134.d: Expected disassembly
* gas/h8300/h8300.exp: Run the new test.
* gas/h8300/h8300-coff.exp: Fix test for COFF based ports to
accept h8300-rtemscoff not just h8300-rtems.
2008-02-27 12:33:42 +00:00
344f17f1fa
* cr16.h (cr16_num_optab): Declared.
...
* cr16-opc.c (cr16_num_optab): Defined
2008-02-18 13:46:45 +00:00
f16db7f54e
PR gas/2626
...
* avr.h (AVR_ISA_2xxe): Define.
* config/tc-avr.c (mcu_types): Change the ISA tyoe of the attiny26
to AVR_ISA_2xxe.
(avr_operand): Disallow post-increment addressing in the lpm
instruction for the attiny26.
2008-02-14 13:04:29 +00:00
58d470721b
* mips.h: Update copyright.
...
(INSN_CHIP_MASK): New macro.
(INSN_OCTEON): New macro.
(CPU_OCTEON): New macro.
(OPCODE_IS_MEMBER): Handle Octeon instructions.
2008-02-04 19:25:05 +00:00
4be948a34a
/gas:
...
2008-01-23 Eric B. Weddington <eric.weddington@atmel.com>
* config/tc-avr.c (mcu_types): Change opcode set for at86rf401.
/include:
2008-01-23 Eric B. Weddington <eric.weddington@atmel.com>
* opcode/avr.h (AVR_ISA_RF401): Add new opcode set for at86rf401.
2008-01-23 17:36:23 +00:00
c7b8bedfb2
/gas:
...
2008-01-03 Eric B. Weddington <eric.weddington@atmel.com>
* config/tc-avr.c (mcu_types): Change opcode set for avr3,
at90usb82, at90usb162.
* doc/c-avr.texi: Change architecture grouping for at90usb82,
at90usb162.
These changes support the new avr35 architecture group in gcc.
/include:
2008-01-03 Eric B. Weddington <eric.weddington@atmel.com>
* opcode/avr.h (AVR_ISA_USB162): Add new opcode set.
(AVR_ISA_AVR3): Likewise.
2008-01-16 17:59:07 +00:00
47c9864a0a
bfd/
...
* archures.c (bfd_mach_mips_loongson_2e): New.
(bfd_mach_mips_loongson_2f): New.
* bfd-in2.h (bfd_mach_mips_loongson_2e): New.
(bfd_mach_mips_loongson_2f): New.
* cpu-mips.c: Add I_loongson_2e and I_loongson_2f to
anonymous enum.
(arch_info_struct): Add Loongson-2E and Loongson-2F entries.
* elfxx-mips.c (_bfd_elf_mips_mach): Handle Loongson-2E
and Loongson-2F flags.
(mips_set_isa_flags): Likewise.
(mips_mach_extensions): Add Loongson-2E and Loongson-2F
entries.
binutils/
* readelf.c (get_machine_flags): Handle Loongson-2E and -2F
flags.
gas/
* config/tc-mips.c (mips_cpu_info_table): Add loongson2e
and loongson2f entries.
* doc/c-mips.texi: Document -march=loongson{2e,2f} options.
gas/testsuite/
* gas/mips/mips.exp: Add loongson-2e and -2f tests.
* gas/mips/loongson-2e.d: New.
* gas/mips/loongson-2e.s: New.
* gas/mips/loongson-2f.d: New.
* gas/mips/loongson-2f.s: New.
include/elf/
* mips.h (E_MIPS_MACH_LS2E): New.
(E_MIPS_MACH_LS2F): New.
include/opcode/
* mips.h (INSN_LOONGSON_2E): New.
(INSN_LOONGSON_2F): New.
(CPU_LOONGSON_2E): New.
(CPU_LOONGSON_2F): New.
(OPCODE_IS_MEMBER): Update for Loongson-2E and -2F flags.
opcodes/
* mips-dis.c (mips_arch_choices): Add Loongson-2E and -2F
entries.
* mips-opc.c (IL2E): New.
(IL2F): New.
(mips_builtin_opcodes): Add Loongson-2E and -2F instructions.
Allow movz and movn for Loongson-2E and -2F. Add movnz entry.
Move coprocessor encodings to the end of the table. Allow
certain MIPS V .ps instructions on the Loongson-2E and -2F.
2007-11-29 12:23:44 +00:00
35e137475d
include/opcode/
...
* mips.h (INSN_ISA*): Redefine certain values as an
enumeration. Update comments.
(mips_isa_table): New.
(ISA_MIPS*): Redefine to match enumeration.
(OPCODE_IS_MEMBER): Modify to correctly test new INSN_ISA*
values.
opcodes/
* mips-opc.c (I3_32, I3_33, I4_32, I4_33, I5_33): New.
(mips_builtin_opcodes): Use these new I* values.
2007-11-29 11:55:19 +00:00
4b8c903325
binutils/
...
* doc/binutils.texi (objdump): Document -Mppcps.
gas/
* config/tc-ppc.c (parse_cpu): Handle "750cl".
(pre_defined_registers): Add "gqr0" to "gqr7", "gqr.0" to "gqr.7".
(md_show_usage): Document -m750cl.
(md_assemble): Handle two delimiters in succession (eg. `),').
* doc/c-ppc.texi (PowerPC-Opts): Document -m750cl.
* testsuite/gas/ppc/ppc.exp: Run ppc70ps dump tests.
* testsuite/gas/ppc/ppc750ps.s: New file.
* testsuite/gas/ppc/ppc750ps.d: Likewise.
include/opcode/
* ppc.h (PPC_OPCODE_PPCPS): New.
opcodes/
* ppc-opc.c (PSW, PSWM, PSQ, PSQM, PSD, MTMSRD_L): New.
(XOPS, XOPS_MASK, XW, XW_MASK): Likewise.
(PPCPS): Likewise.
(powerpc_opcodes): Add all pair singles instructions.
* ppc-dis.c (powerpc_dialect): Handle "ppcps".
(print_ppc_disassembler_options): Document -Mppcps.
2007-08-24 00:56:30 +00:00
13c9f5c677
Correct ChangeLog entries.
2007-08-01 15:27:55 +00:00
ee5dec125d
gas/testsuite/
...
* gas/m68k/mcf-coproc.d: New.
* gas/m68k/mcf-coproc.s: New.
* gas/m68k/all.exp: Add it.
gas/
* config/tc-m68k.c (m68k_ip): Add j & K operand types.
(install_operand): Add E encoding.
(md_begin): Check and skip initial '.' arg character.
(get_num): Add 0..511 case.
include/
* opcode/m68k.h: Document j K & E.
opcodes/
* m68k-dis.c (fetch_arg): Add E. Replace length switch with
direct masking.
(print_ins_arg): Add j & K operand types.
(match_insn_m68k): Check and skip initial '.' arg character.
(m68k_scan_mask): Likewise.
* m68k-opc.c (m68k_opcodes): Add coprocessor instructions.
2007-07-03 07:54:19 +00:00
8931495a14
New port: National Semiconductor's CR16
2007-06-29 14:09:34 +00:00
211f9f1fce
gas/
...
PR 4448
* config/tc-ppc.c (ppc_insert_operand): Don't increase min for
PPC_OPERAND_PLUS1.
include/opcode/
* ppc.h (PPC_OPERAND_PLUS1): Update comment.
2007-05-02 11:24:17 +00:00
1974731bb6
gas/testsuite/
...
* gas/m68k/br-isaa.s: New.
* gas/m68k/br-isaa.d: New.
* gas/m68k/br-isab.s: New.
* gas/m68k/br-isab.d: New.
* gas/m68k/br-isac.s: New.
* gas/m68k/br-isac.d: New.
* gas/m68k/all.exp: Adjust.
gas/
* config/tc-m68k.c (mcf54455_ctrl): New.
(HAVE_LONG_DISP, HAVE_LONG_CALL, HAVE_LONG_COND): New.
(m68k_archs): Add isac.
(m68k_cpus): Add 54455 family.
(m68k_ip): Split Bg into Bb, Bs, Bg.
(m68k_elf_final_processing): Add ISA_C.
* doc/c-m68k.texi (M680x0 Options): Add isac.
include/opcode/
* m68k.h (mcfisa_c): New.
(mcfusp, mcf_mask): Adjust.
bfd/
* archures.c (bfd_mach_mcf_isa_c, bfd_mach_mcf_isa_c_mac,
bfd_mach_mcf_isa_c_emac): New.
* elf32-m68k.c (ISAC_PLT_ENTRY_SIZE, elf_isac_plt0_entry,
elf_isac_plt_entry, elf_isac_plt_info): New.
(elf32_m68k_object_p): Add ISA_C.
(elf32_m68k_print_private_bfd_data): Print ISA_C.
(elf32_m68k_get_plt_info): Detect ISA_C.
* cpu-m68k.c (arch_info): Add ISAC.
(m68k_arch_features): Likewise,
(bfd_m68k_compatible): ISAs B & C are not compatible.
opcodes/
* m68k-opc.c: Mark mcfisa_c instructions.
2007-04-23 07:51:30 +00:00
d8507ced8b
include/opcode/
...
* ppc.h (struct powerpc_operand): Replace "bits" with "bitm".
(num_powerpc_operands): Declare.
(PPC_OPERAND_SIGNED et al): Redefine as hex.
(PPC_OPERAND_PLUS1): Define.
opcodes/
* ppc-dis.c (print_insn_powerpc): Adjust for struct powerpc_operand
change.
* ppc-opc.c (powerpc_operands): Replace bit count with bit mask
in all entries. Add PPC_OPERAND_SIGNED to DE entry. Remove
references to following deleted functions.
(insert_bd, extract_bd, insert_dq, extract_dq): Delete.
(insert_ds, extract_ds, insert_de, extract_de): Delete.
(insert_des, extract_des, insert_li, extract_li): Delete.
(insert_nb, insert_rsq, insert_rtq, insert_ev2, extract_ev2): Delete.
(insert_ev4, extract_ev4, insert_ev8, extract_ev8): Delete.
(num_powerpc_operands): New constant.
(XSPRG_MASK): Remove entire SPRG field.
(powerpc_opcodes <bcctre, bcctrel>): Use XLBB_MASK not XLYBB_MASK.
gas/
* messages.c (as_internal_value_out_of_range): Extend to report
errors for values with invalid low bits set.
* config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
fields. Check that operands and opcode fields are disjoint.
(ppc_insert_operand): Check operands using mask rather than bit
count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
insertion code.
(md_apply_fix): Adjust for struct powerpc_operand change.
2007-04-20 12:25:12 +00:00
832a897240
Fix year.
2007-03-27 22:45:19 +00:00
3ce0c60b4c
gas/
...
2003-03-21 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c: Replace REX_MODE64, REX_EXTX, REX_EXTY
and REX_EXTZ with REX_W, REX_R, REX_X and REX_B respectively.
include/opcode/
2003-03-21 H.J. Lu <hongjiu.lu@intel.com>
* i386.h (REX_MODE64): Renamed to ...
(REX_W): This.
(REX_EXTX): Renamed to ...
(REX_R): This.
(REX_EXTY): Renamed to ...
(REX_X): This.
(REX_EXTZ): Renamed to ...
(REX_B): This.
opcodes/
2003-03-21 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (REX_MODE64): Remove definition.
(REX_EXTX): Likewise.
(REX_EXTY): Likewise.
(REX_EXTZ): Likewise.
(USED_REX): Use REX_OPCODE instead of 0x40.
Replace REX_MODE64, REX_EXTX, REX_EXTY and REX_EXTZ with REX_W,
REX_R, REX_X and REX_B respectively.
2007-03-21 21:23:43 +00:00
e96d068ed3
gas/
...
2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.am: Run "make dep-am".
* Makefile.in: Regenerated.
* config/tc-i386.c: Include "opcodes/i386-opc.h" instead of
"opcode/i386.h".
(md_begin): Check reg_name != NULL for the last entry in
i386_regtab.
* config/tc-i386.h: Move many entries to opcode/i386.h and
opcodes/i386-opc.h.
* configure.in (need_opcodes): Set true for i386.
* configure: Regenerated.
include/opcode/
2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
* i386.h: Add entries from config/tc-i386.h and move tables
to opcodes/i386-opc.h.
opcodes/
2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.am (CFILES): Add i386-opc.c.
(ALL_MACHINES): Add i386-opc.lo.
Run "make dep-am".
* Makefile.in: Regenerated.
* configure.in: Add i386-opc.lo for bfd_i386_arch.
* configure: Regenerated.
* i386-dis.c: Include "opcode/i386.h".
(MAXLEN): Renamed to MAX_MNEM_SIZE. Remove definition.
(FWAIT_OPCODE): Remove definition.
(UNIXWARE_COMPAT): Renamed to SYSV386_COMPAT. Remove definition.
(MAX_OPERANDS): Remove definition.
* i386-opc.c: New file.
* i386-opc.h: Likewise.
2007-03-15 14:31:24 +00:00
d7e13a06c2
2007-03-13 H.J. Lu <hongjiu.lu@intel.com>
...
* i386.h (FloatDR): Removed.
(i386_optab): Use FloatD and FloatD|FloatR instead of FloatDR.
2007-03-14 03:26:06 +00:00
4e747c10dc
2007-03-06 Andreas Krebbel <krebbel1@de.ibm.com>
...
* opcodes/s390-opc.c (INSTR_RRE_FR, INSTR_RRF_F0FF2, INSTR_RRF_F0FR,
INSTR_RRF_UUFF, INSTR_RRF_0UFF, INSTR_RRF_FFFU, INSTR_RRR_F0FF): New
instruction formats added.
(MASK_RRE_FR, MASK_RRF_F0FF2, MASK_RRF_F0FR, MASK_RRF_UUFF,
MASK_RRF_0UFF, MASK_RRF_FFFU, MASK_RRR_F0FF): New instruction format
masks added.
* opcodes/s390-opc.txt (lpdfr - tgxt): Decimal floating point
instructions added.
* opcodes/s390-mkopc.c (s390_opcode_cpu_val): S390_OPCODE_Z9_EC added.
(main): z9-ec cpu type option added.
* include/opcode/s390.h (s390_opcode_cpu_val): S390_OPCODE_Z9_EC added.
2007-03-06 Andreas Krebbel <krebbel1@de.ibm.com>
* config/tc-s390.c (md_parse_option): z9-ec option added.
2007-03-06 Andreas Krebbel <krebbel1@de.ibm.com>
* gas/s390/zarch-z9-ec.d: New file.
* gas/s390/zarch-z9-ec.s: New file.
* gas/s390/s390.exp: Run the z9-ec testcases.
2007-03-06 13:19:07 +00:00
a49625d566
* spu-insns.h: Add soma double-float insns.
2007-03-01 11:17:41 +00:00
fe32d85c52
[ gas/ChangeLog ]
...
* config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
(macro_build): Add case '2'.
(macro): Expand M_BALIGN to nop, packrl.ph or balign.
(validate_mips_insn): Add support for balign instruction.
(mips_ip): Handle DSP R2 instructions. Support balign instruction.
(OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
command line options.
(s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
(md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
* doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
.set dspr2, .set nodspr2.
[ gas/testsuite/ChangeLog ]
* gas/mips/mips32-dspr2.s, gas/mips/mips32-dspr2.d: New test for
DSP R2.
* gas/mips/mips.exp: Run new test.
[ include/opcode/Changelog ]
* mips.h (OP_SH_BP, OP_MASK_BP): Add support for balign instruction.
(INSN_DSPR2): Add flag for DSP R2 instructions.
(M_BALIGN): New macro.
[ opcodes/ChangeLog ]
* mips-dis.c (mips_arch_choices): Add DSP R2 support.
(print_insn_args): Add support for balign instruction.
* mips-opc.c (D33): New shortcut for DSP R2 instructions.
(mips_builtin_opcodes): Add DSP R2 instructions.
[ sim/mips/ChangeLog ]
* Makefile.in (IGEN_INCLUDE): Add dsp2.igen.
* configure.ac (mips*-sde-elf*, mipsisa32r2*-*-*, mipsisa64r2*-*-*):
Add dsp2 to sim_igen_machine.
* configure: Regenerate.
* dsp.igen (do_ph_op): Add MUL support when op = 2.
(do_ph_mulq): New function to support mulq_rs.ph and mulq_s.ph.
(mulq_rs.ph): Use do_ph_mulq.
(MFHI, MFLO, MTHI, MTLO): Move these instructions to mips.igen.
* mips.igen: Add dsp2 model and include dsp2.igen.
(MFHI, MFLO, MTHI, MTLO): Extend these instructions for
for *mips32r2, *mips64r2, *dsp.
(MADD, MADDU, MSUB, MSUBU, MULT, MULTU): Extend these instructions
for *mips32r2, *mips64r2, *dsp2.
* dsp2.igen: New file for MIPS DSP REV 2 ASE.
[ sim/testsuite/sim/mips/ChangeLog ]
* basic.exp: Run the dsp2 test.
* utils-dsp.inc (dspckacc_astio, dspck_tsimm): New macro.
* mips32-dsp2.s: New test.
2007-02-20 13:28:54 +00:00
77da924b40
gas/
...
* config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete.
* config/tc-i386.c: Wrap overly long lines, whitespace fixes.
(process_operands): Move old Seg2ShortForm and Seg3ShortForm
code, and test for these insns using a combination of
opcode_modifier and operand_types.
include/opcode/
* i386.h (i386_optab): Replace all occurrences of Seg2ShortForm
and Seg3ShortFrom with Shortform.
2007-02-13 23:23:53 +00:00
79010c3b34
gas/testsuite/
...
2007-02-11 H.J. Lu <hongjiu.lu@intel.com>
PR gas/4027
* gas/i386/opcode.s: Add more tests for "test".
* i386/opcode-intel.d: Updated.
* gas/i386/opcode-suffix.d: Likewise.
* gas/i386/opcode.d: Likewise.
include/opcode/
2007-02-11 H.J. Lu <hongjiu.lu@intel.com>
PR gas/4027
* i386.h (i386_optab): Put the real "test" before the pseudo
one.
2007-02-12 04:51:40 +00:00
2a327eef52
bfd/
...
* archures.c (bfd_mach_cpu32_fido): Rename to bfd_mach_fido.
* bfd-in2.h: Regenerate.
* cpu-m68k.c (arch_info_struct): Use bfd_mach_fido instead of
bfd_mach_cpu32_fido.
(m68k_arch_features): Use fido_a instead of cpu32.
(bfd_m68k_compatible): Reject the combination of Fido and
ColdFire. Accept the combination of CPU32 and Fido with a
warning.
* elf32-m68k.c (elf32_m68k_object_p,
elf32_m68k_merge_private_bfd_data,
elf32_m68k_print_private_bfd_data): Treat Fido as an
architecture by itself.
binutils/
* readelf.c (get_machine_flags): Treat Fido as an architecture
by itself.
gas/
* config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an
architecture by itself.
(m68k_ip): Don't issue a warning for tbl instructions on fido.
(m68k_elf_final_processing): Treat Fido as an architecture by
itself.
include/elf/
* m68k.h (EF_M68K_FIDO): New.
(EF_M68K_ARCH_MASK): OR EF_M68K_FIDO.
(EF_M68K_CPU32_FIDO_A, EF_M68K_CPU32_MASK): Remove.
include/opcode/
* m68k.h (m68010up): OR fido_a.
opcodes/
* m68k-opc.c (m68k_opcodes): Replace cpu32 with
cpu32 | fido_a except on tbl instructions.
2007-01-08 18:42:37 +00:00
c5a95a529e
bfd/
...
* archures.c (bfd_mach_cpu32_fido): New.
(bfd_mach_mcf_isa_a_nodiv, bfd_mach_mcf_isa_a,
bfd_mach_mcf_isa_a_mac, bfd_mach_mcf_isa_a_emac,
bfd_mach_mcf_isa_aplus, bfd_mach_mcf_isa_aplus_mac,
bfd_mach_mcf_isa_aplus_emac, bfd_mach_mcf_isa_b_nousp,
bfd_mach_mcf_isa_b_nousp_mac, bfd_mach_mcf_isa_b_nousp_emac,
bfd_mach_mcf_isa_b, bfd_mach_mcf_isa_b_mac,
bfd_mach_mcf_isa_b_emac, bfd_mach_mcf_isa_b_float,
bfd_mach_mcf_isa_b_float_mac, bfd_mach_mcf_isa_b_float_emac):
Increment the defined values.
* bfd-in2.h: Regenerate.
* cpu-m68k.c (arch_info_struct): Add en entry for
bfd_mach_cpu32_fido.
* elf32-m68k.c (elf32_m68k_object_p): Handle
EF_M68K_CPU32_FIDO_A.
(elf32_m68k_merge_private_bfd_data): Use EF_M68K_CPU32_MASK.
(elf32_m68k_print_private_bfd_data): Handle
EF_M68K_CPU32_FIDO_A.
binutils/
* readelf.c (get_machine_flags): Handle EF_M68K_CPU32_FIDO_A.
gas/
* config/tc-m68k.c (cpu_of_arch): Add fido.
(m68k_archs, m68k_cpu): Add entries for fido.
(m68k_elf_final_processing): Handle EF_M68K_CPU32_FIDO_A.
include/elf/
* m68k.h (EF_M68K_CPU32_FIDO_A, EF_M68K_CPU32_MASK): New.
include/opcode/
* m68k.h (fido_a): New.
2006-12-25 22:39:21 +00:00
b0ee53e9bc
* m68k.h (mcfmac, mcfemac, cfloat, mcfhwdiv, mcfisa_a,
...
mcfisa_aa, mcfisa_b, mcfusp, mcf_mask): Double the defined
values.
2006-12-24 02:58:37 +00:00
2525dd2eab
Remove entries checked in by accident.
2006-11-27 22:05:26 +00:00
baf35b5d76
gas/
...
2006-11-08 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.h (CpuPNI): Removed.
(CpuUnknownFlags): Replace CpuPNI with CpuSSE3.
* config/tc-i386.c (md_assemble): Likewise.
include/opcode/
2006-11-08 H.J. Lu <hongjiu.lu@intel.com>
* i386.h (i386_optab): Replace CpuPNI with CpuSSE3.
2006-11-08 19:56:02 +00:00
a6c48c3850
* tc-score.c (data_op2): Check invalid operands.
...
(my_get_expression): Const operand of some instructions can not be symbol in assembly.
(get_insn_class_from_type): Handle instruction type Insn_internal.
(do_macro_ldst_label): Modify inst.type.
(Insn_PIC): Delete.
* score-inst.h (enum score_insn_type): Add Insn_internal.
* tc-score.c (data_op2): The immediate value in lw is 15 bit signed.
* score-dis.c (print_insn): Correct the error code to print correct PCE instruction disassembly.
2006-10-31 09:54:41 +00:00
ddb2c9e81c
New Cell SPU port.
2006-10-25 06:49:18 +00:00
e359f110ba
Add powerpc cell support.
2006-10-24 01:27:28 +00:00
7e39651a54
Fix AMDFAM10 POPCNT instruction
2006-10-23 22:53:28 +00:00
5c9dda86e5
gas/
...
2006-09-28 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.h (CpuMNI): Renamed to ...
(CpuSSSE3): This.
(CpuUnknownFlags): Updated.
(processor_type): Replace PROCESSOR_YONAH with PROCESSOR_CORE
and PROCESSOR_MEROM with PROCESSOR_CORE2.
* config/tc-i386.c: Updated.
* doc/c-i386.texi: Likewise.
* config/tc-i386.c (cpu_arch): Add ".ssse3", "core" and "core2".
include/opcode/
2006-09-28 H.J. Lu <hongjiu.lu@intel.com>
* i386.h: Replace CpuMNI with CpuSSSE3.
2006-09-28 14:06:36 +00:00
1aeca89244
bfd/
...
2006-09-26 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
Ian Lance Taylor <ian@wasabisystems.com>
Ben Elliston <bje@wasabisystems.com>
* archures.c: Add definition for bfd_mach_arm_iWMMXt2.
* cpu-arm.c (processors): Add bfd_mach_arm_iWMMXt2.
(arch_info_struct, bfd_arm_update_notes): Likewise.
(architectures): Likewise.
(bfd_arm_merge_machines): Check for iWMMXt2.
* bfd-in2.h: Rebuild.
gas/
2006-09-26 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
Ian Lance Taylor <ian@wasabisystems.com>
Ben Elliston <bje@wasabisystems.com>
* config/tc-arm.c (arm_cext_iwmmxt2): New.
(enum operand_parse_code): New code OP_RIWR_I32z.
(parse_operands): Handle OP_RIWR_I32z.
(do_iwmmxt_wmerge): New function.
(do_iwmmxt_wldstd): Handle iwmmxt2 case where second operand is
a register.
(do_iwmmxt_wrwrwr_or_imm5): New function.
(insns): Mark instructions as RIWR_I32z as appropriate.
Also add torvsc<b,h,w>, wabs<b,h,w>, wabsdiff<b,h,w>,
waddbhus<l,m>, waddhc, waddwc, waddsubhx, wavg4{r}, wmaddu{x,n},
wmadds{x,n}, wmerge, wmiaxy{n}, wmiawxy{n}, wmul<sm,um>{r},
wmulw<um,sm,l>{r}, wqmiaxy{n}, wqmulm{r}, wqmulwm{r}, wsubaddhx.
(md_begin): Handle IWMMXT2.
(arm_cpus): Add iwmmxt2.
(arm_extensions): Likewise.
(arm_archs): Likewise.
gas/testsuite/
2006-09-26 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
Ian Lance Taylor <ian@wasabisystems.com>
Ben Elliston <bje@wasabisystems.com>
* gas/arm/iwmmxt2.s: New file.
* gas/arm/iwmmxt2.d: New file.
include/opcode/
2006-09-26 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
Ian Lance Taylor <ian@wasabisystems.com>
Ben Elliston <bje@wasabisystems.com>
* arm.h (ARM_CEXT_IWMMXT2, ARM_ARCH_IWMMXT2): Define.
opcodes/
2006-09-26 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
Ian Lance Taylor <ian@wasabisystems.com>
Ben Elliston <bje@wasabisystems.com>
* arm-dis.c (coprocessor_opcodes): The X-qualifier to WMADD may
only be used with the default multiply-add operation, so if N is
set, don't bother printing X. Add new iwmmxt instructions.
(IWMMXT_INSN_COUNT): Update.
(iwmmxt_wwssnames): Qualify "wwss" names at index 2, 6, 10 and 14
with a 'c' suffix.
(print_insn_coprocessor): Check for iWMMXt2. Handle format
specifiers 'r', 'i'.
2006-09-26 12:04:45 +00:00
7aa8dc8eb0
Add support for Score target.
2006-09-16 23:51:50 +00:00
62f94a893e
2006-07-14 H.J. Lu <hongjiu.lu@intel.com>
...
* i386.h (i386_optab): Remove InvMem from maskmovq, movhlps,
movlhps, movmskps, pextrw, pmovmskb, movmskpd, maskmovdqu,
movdq2q and movq2dq.
2006-07-14 16:15:27 +00:00
2d73611e56
Add amdfam10 instructions
2006-07-13 22:25:48 +00:00
acfd62fdfa
gas/testsuite/
...
2006-06-12 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Run nops and x86-64-nops.
* gas/i386/nops.d: New file.
* gas/i386/nops.s: Likewise.
* gas/i386/x86-64-nops.d: Likewise.
* gas/i386/x86-64-nops.s: Likewise.
include/opcode/
2006-06-12 H.J. Lu <hongjiu.lu@intel.com>
* i386.h (i386_optab): Add "nop" with memory reference.
opcodes/
2006-06-12 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (dis386_twobyte): Use "nopQ" for 0x1f.
(twobyte_has_modrm): Set 1 for 0x1f.
2006-06-12 18:59:36 +00:00
2d853d0e39
gas/
...
2006-06-12 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (process_suffix): Don't add rex64 for
"xchg %rax,%rax".
gas/testsuite/
2006-06-12 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/opcode.s: Add "xchg %ax,%ax".
* gas/i386/opcode.d: Updated.
* gas/i386/x86-64-opcode.s: Add xchg %ax,%ax, xchg %eax,%eax,
xchg %rax,%rax, rex64 xchg %rax,%rax and xchg %rax,%r8.
* gas/i386/x86-64-opcode.d: Updated.
include/opcode/
2006-06-12 H.J. Lu <hongjiu.lu@intel.com>
* i386.h (i386_optab): Update comment for 64bit NOP.
opcodes/
2006-06-12 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (NOP_Fixup): Removed.
(NOP_Fixup1): New.
(NOP_Fixup2): Likewise.
(dis386): Use NOP_Fixup1 and NOP_Fixup2 on 0x90.
2006-06-12 18:55:42 +00:00
48df10c776
include/opcode/
...
* ppc.h (PPC_OPCODE_POWER6): Define.
Adjust whitespace.
gas/
* config/tc-ppc.c (parse_cpu): Handle "-mpower6".
(md_show_usage): Document it.
(ppc_setup_opcodes): Test power6 opcode flag bits.
* doc/c-ppc.texi (PowerPC-Opts): Document "-mpower6".
opcodes/
* ppc-dis.c (powerpc_dialect): Handle power6 option.
(print_ppc_disassembler_options): Mention power6.
2006-06-07 05:23:59 +00:00
c281fc320f
[ gas/ChangeLog ]
...
* config/tc-mips.c (ISA_SUPPORTS_DSP64): New macro.
(CPU_HAS_MIPS3D, CPU_HAS_MDMX, CPU_HAS_DSP, CPU_HAS_MT): Delete.
(macro_build): Update comment.
(mips_ip): Allow DSP64 instructions for MIPS64R2.
(mips_after_parse_args): Remove uses of CPU_HAS_MIPS3D and
CPU_HAS_MDMX.
(mips_cpu_info): Fix formatting. Add MIPS_CPU_ASE_MIPS3D and
MIPS_CPU_ASE_MDMX flags for sb1.
[ gas/testsuite/ChangeLog ]
* gas/mips/mips64-dsp.s, gas/mips/mips64-dsp.d: New DSP64 tests.
* gas/mips/mips.exp: Run DSP64 tests.
[ opcodes/ChangeLog ]
* mips-dis.c: Disassemble DSP64 instructions for MIPS64R2.
* mips-opc.c: Add DSP64 instructions.
2006-06-06 10:49:48 +00:00
9042dfec74
[ gas/ChangeLog ]
...
* config/tc-mips.c (macro_build): Use INSERT_OPERAND wherew
appropriate.
(mips16_macro_build): Use MIPS16_INSERT_OPERAND where appropriate.
(mips_ip): Make overflowed/underflowed constant arguments in DSP
and MT instructions a fatal error. Use INSERT_OPERAND where
appropriate. Improve warnings for break and wait code overflows.
Use symbolic constant of OP_MASK_COPZ.
(mips16_ip): Use MIPS16_INSERT_OPERAND where appropriate.
[ gas/testsuite/ChangeLog ]
* gas/mips/mips32-dsp.d, gas/mips/mips32-dsp.s, gas/mips/mips32-mt.d,
gas/mips/mips32-mt.s: Remove instructions with invalid arguments.
* gas/mips/mips32-dsp.l, gas/mips/mips32-mt.l: Delete file.
[ include/opcode/ChangeLog ]
* mips.h: Improve description of MT flags.
2006-06-05 16:28:36 +00:00
fed9f6504c
include/opcodes/
...
* m68k.h (mcf_mask): Define.
opcodes/
* m68k-opc.c (m68k_opcodes): Fix the masks of the Coldfire fmovemd
and fmovem entries. Put register list entries before immediate
mask entries. Use "l" rather than "L" in the fmovem entries.
* m68k-dis.c (match_insn_m68k): Remove the PRIV argument and work it
out from INFO.
(m68k_scan_mask): New function, split out from...
(print_insn_m68k): ...here. If no architecture has been set,
first try printing an m680x0 instruction, then try a Coldfire one.
gas/testsuite/
* gas/m68k/mcf-fpu.s: Add fmovemd and fmovem instructions.
* gas/m68k/mcf-fpu.d: Adjust accordingly.
2006-05-25 08:09:03 +00:00
95d55a568f
[ gas/ChangeLog ]
...
* config/tc-mips.c (macro_build): Add case 'k' to handle cache
instruction.
(macro): Add new case M_CACHE_AB.
[ opcodes/ChangeLog ]
* mips-opc.c: Add macro for cache instruction.
[ include/opcode/ChangeLog ]
* mips.h (enum): Add macro M_CACHE_AB.
2006-05-05 15:41:23 +00:00
4490f3545a
[ gas/testsuite/ChangeLog ]
...
2006-05-04 Thiemo Seufer <ths@mips.com>
Nigel Stephens <nigel@mips.com>
* gas/mips/mips.exp: Run mips32-dsp tests only for mips32r2.
* gas/mips/set-arch.d: Adjust according to opcode table changes.
[ include/opcode/ChangeLog ]
2006-05-04 Thiemo Seufer <ths@mips.com>
Nigel Stephens <nigel@mips.com>
David Ung <davidu@mips.com>
* mips.h: Add INSN_SMARTMIPS define.
[ opcodes/ChangeLog ]
2006-05-04 Thiemo Seufer <ths@mips.com>
Nigel Stephens <nigel@mips.com>
David Ung <davidu@mips.com>
* mips-dis.c (mips_arch_choices): Add smartmips instruction
decoding to MIPS32 and MIPS32R2. Limit DSP decoding to release
2 ISAs. Add MIPS3D decoding to MIPS32R2. Add MT decoding to
MIPS64R2.
* mips-opc.c: fix random typos in comments.
(INSN_SMARTMIPS): New defines.
(mips_builtin_opcodes): Add paired single support for MIPS32R2.
Move bc3f, bc3fl, bc3t, bc3tl downwards. Move flushi, flushd,
flushid, wb upwards. Move cfc3, ctc3 downwards. Rework the
FP_S and FP_D flags to denote single and double register
accesses separately. Move dmfc3, dmtc3, mfc3, mtc3 downwards.
Allow jr.hb and jalr.hb for release 1 ISAs. Allow luxc1, suxc1
for MIPS32R2. Add SmartMIPS instructions. Add two-argument
variants of bc2f, bc2fl, bc2t, bc2tl. Add mfhc2, mthc2 to
release 2 ISAs.
* mips16-opc.c (mips16_opcodes): Add sdbbp instruction.
2006-05-04 10:47:05 +00:00
0015de8d38
[ gas/ChangeLog ]
...
2006-04-30 Thiemo Seufer <ths@mips.com>
David Ung <davidu@mips.com>
* config/tc-mips.c (validate_mips_insn): Handling of udi cases.
(mips_immed): New table that records various handling of udi
instruction patterns.
(mips_ip): Adds udi handling.
[ include/opcode/ChangeLog ]
2006-04-30 Thiemo Seufer <ths@mips.com>
David Ung <davidu@mips.com>
* mips.h: Defines udi bits and masks. Add description of
characters which may appear in the args field of udi
instructions.
[ opcodes/ChangeLog ]
2006-04-30 Thiemo Seufer <ths@mips.com>
David Ung <davidu@mips.com>
* mips-opc.c (mips_builtin_opcodes): Add udi instructions
"udi0" to "udi15".
* mips-dis.c (print_insn_args): Adds udi argument handling.
2006-04-30 18:34:39 +00:00
0ba7a49150
Move opcode ChangeLog entry to opcode/ChangeLog.
2006-04-29 16:54:51 +00:00
564d770d9a
* mips.h: Improve comments describing the bitfield instruction
...
fields.
2006-04-26 18:19:15 +00:00
13ac451951
* opcode/arm.h (FPU_VFP_EXT_V3): Define constant.
...
(FPU_NEON_EXT_V1): Likewise.
(FPU_VFP_HARD): Update.
(FPU_VFP_V3): Define macro.
(FPU_ARCH_VFP_V3, FPU_ARCH_VFP_V3_PLUS_NEON_V1): Define macros.
2006-04-26 15:41:16 +00:00
853f446a98
Add support for attiny261, attiny461, attiny861, attiny25, attiny45,
...
attiny85, attiny24, attiny44, attiny84, at90pwm2, at90pwm3, atmega164,
atmega324, atmega644, atmega329, atmega3290, atmega649, atmega6490,
atmega406, atmega640, atmega1280, atmega1281, at90can32, at90can64,
at90usb646, at90usb647, at90usb1286 and at90usb1287.
Move atmega48 and atmega88 from AVR_ISA_M8 to AVR_ISA_PWMx.
2006-04-07 15:18:08 +00:00
cdc2256b76
gas:
...
* config/tc-m68k.c (m68000_control_regs, m68010_control_regs,
m68020_control_regs, m68040_control_regs, m68060_control_regs,
mcf_control_regs, mcf5208_control_regs, mcf5213_control_regs,
mcf5329_control_regs, mcf5249_control_regs, mcf528x_control_regs,
mcfv4e_control_regs, m68010_control_regs): Rename and reorder to ...
(m68000_ctrl, m68010_ctrl, m68020_ctrl, m68040_ctrl, m68060_ctrl,
mcf_ctrl, mcf5208_ctrl, mcf5213_ctrl, mcf5235_ctrl, mcf5249_ctrl,
mcf5216_ctrl, mcf5250_ctrl, mcf5271_ctrl, mcf5272_ctrl,
mcf5282_ctrl, mcfv4e_ctrl): ... these.
(mcf5275_ctrl, mcf5329_ctrl, mcf5373_ctrl): New.
(struct m68k_cpu): Change chip field to control_regs.
(current_chip): Remove.
(control_regs): New.
(m68k_archs, m68k_extensions): Adjust.
(m68k_cpus): Reorder to be in cpu number order. Adjust.
(CPU_ALLOW_MC, CPU_ALLOW_NEGATION): Remove.
(find_cf_chip): Reimplement for new organization of cpu table.
(select_control_regs): Remove.
(mri_chip): Adjust.
(struct save_opts): Save control regs, not chip.
(s_save, s_restore): Adjust.
(m68k_lookup_cpu): Give deprecated warning when necessary.
(m68k_init_arch): Adjust.
(md_show_usage): Adjust for new cpu table organization.
include/opcodes:
* m68k.h (cpu_m68k, cpu_cf, cpu_m68000, cpu_m68008, cpu_m68010,
cpu_m68020, cpu_m68ec030, cpu_m68040, cpu_m68060, cpu_m68851,
cpu_m68881, cpu_m68882, cpu_cpu32, cpu_cf5200, cpu_cf5206e,
cpu_cf5208, cpu_cf521x, cpu_cf5213, cpu_cf5249, cpu_cf528x,
cpu_cf5307, cpu_cf5329, cpu_cf5407, cpu_cf547x, cpu_cf548x): Remove.
2006-03-28 07:19:16 +00:00
dd665069d7
2006-03-10 Paul Brook <paul@codesourcery.com>
...
include/opcode/
* arm.h (ARM_AEXT_V7_ARM): Include v6ZK extensions.
2006-03-10 17:16:49 +00:00
9c39dc2a8c
missing changelog entry for my 2006-02-07 patch
...
* m68k.h (m68008, m68ec030, m68882): Remove.
(m68k_mask): New.
(cpu_m68k, cpu_cf): New.
(mcf5200, mcf5206e, mcf521x, mcf5249, mcf528x, mcf5307, mcf5407
2006-03-06 13:46:53 +00:00
8b48d53f29
* hppa.h (pa_opcodes): Reorder bb opcodes so that pa10 opcodes come
...
first. Correct mask of bb "B" opcode.
2006-03-04 22:11:48 +00:00
e3ff04608e
gas/
...
2006-02-27 H.J. Lu <hongjiu.lu@intel.com>
* gas/config/tc-i386.c (output_insn): Support Intel Merom New
Instructions.
* gas/config/tc-i386.h (CpuMNI): New.
(CpuUnknownFlags): Add CpuMNI.
gas/testsuite/
2006-02-27 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Add merom and x86-64-merom.
* gas/i386/merom.d: New file.
* gas/i386/merom.s: Likewise.
* gas/i386/x86-64-merom.d: Likewise.
* gas/i386/x86-64-merom.s: Likewise.
include/opcode/
2006-02-27 H.J. Lu <hongjiu.lu@intel.com>
* i386.h (i386_optab): Support Intel Merom New Instructions.
opcodes/
2006-02-27 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (IS_3BYTE_OPCODE): New for 3-byte opcodes used by
Intel Merom New Instructions.
(THREE_BYTE_0): Likewise.
(THREE_BYTE_1): Likewise.
(three_byte_table): Likewise.
(dis386_twobyte): Use THREE_BYTE_0 for entry 0x38. Use
THREE_BYTE_1 for entry 0x3a.
(twobyte_has_modrm): Updated.
(twobyte_uses_SSE_prefix): Likewise.
(print_insn): Handle 3-byte opcodes used by Intel Merom New
Instructions.
2006-02-27 15:35:37 +00:00
70b232636f
2006-02-24 Paul Brook <paul@codesourcery.com>
...
gas/
* config/arm/tc-arm.c (arm_ext_v6_notm, arm_ext_div, arm_ext_v7,
arm_ext_v7a, arm_ext_v7r, arm_ext_v7m): New variables.
(struct asm_barrier_opt): Define.
(arm_v7m_psr_hsh, arm_barrier_opt_hsh): New variables.
(parse_psr): Accept V7M psr names.
(parse_barrier): New function.
(enum operand_parse_code): Add OP_oBARRIER.
(parse_operands): Implement OP_oBARRIER.
(do_barrier): New function.
(do_dbg, do_pli, do_t_barrier, do_t_dbg, do_t_div): New functions.
(do_t_cpsi): Add V7M restrictions.
(do_t_mrs, do_t_msr): Validate V7M variants.
(md_assemble): Check for NULL variants.
(v7m_psrs, barrier_opt_names): New tables.
(insns): Add V7 instructions. Mark V6 instructions absent from V7M.
(md_begin): Initialize arm_v7m_psr_hsh and arm_barrier_opt_hsh.
(arm_cpu_option_table): Add Cortex-M3, R4 and A8.
(arm_arch_option_table): Add armv7, armv7a, armv7r and armv7m.
(struct cpu_arch_ver_table): Define.
(cpu_arch_ver): New.
(aeabi_set_public_attributes): Use cpu_arch_ver. Set
Tag_CPU_arch_profile.
* doc/c-arm.texi: Document new cpu and arch options.
gas/testsuite/
* gas/arm/thumb32.d: Fix expected msr and mrs output.
* gas/arm/arch7.d: New test.
* gas/arm/arch7.s: New test.
* gas/arm/arch7m-bad.l: New test.
* gas/arm/arch7m-bad.d: New test.
* gas/arm/arch7m-bad.s: New test.
include/opcode/
* arm.h: Add V7 feature bits.
opcodes/
* arm-dis.c (arm_opcodes): Add V7 instructions.
(thumb32_opcodes): Ditto. Handle V7M MSR/MRS variants.
(print_arm_address): New function.
(print_insn_arm): Use it. Add 'P' and 'U' cases.
(psr_name): New function.
(print_insn_thumb32): Add 'U', 'C' and 'D' cases.
2006-02-24 15:36:36 +00:00
67f0a0341c
bfd/
...
2006-02-23 H.J. Lu <hongjiu.lu@intel.com>
* cpu-ia64-opc.c (ins_immu5b): New.
(ext_immu5b): Likewise.
(elf64_ia64_operands): Add IMMU5b.
gas/
2006-02-23 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-ia64.c (operand_match): Handle IA64_OPND_IMMU5b.
gas/testsuite/
2006-02-23 H.J. Lu <hongjiu.lu@intel.com>
* gas/ia64/opc-i.s: Add tests for tf.
* gas/ia64/pseudo.s: Likewise.
* gas/ia64/opc-i.d: Updated.
* gas/ia64/pseudo.d: Likewise.
include/opcode/
2006-02-23 H.J. Lu <hongjiu.lu@intel.com>
* ia64.h (ia64_opnd): Add IA64_OPND_IMMU5b.
opcodes/
2006-02-23 H.J. Lu <hongjiu.lu@intel.com>
* ia64-opc-i.c (bXc): New.
(mXc): Likewise.
(OpX2TaTbYaXcC): Likewise.
(TF). Likewise.
(TFCM). Likewise.
(ia64_opcodes_i): Add instructions for tf.
* ia64-opc.h (IMMU5b): New.
* ia64-asmtab.c: Regenerated.
2006-02-23 21:36:17 +00:00
86fdf2166a
* bfd/archures.c (bfd_mach_mcf5200, bfd_mach_mcf5206e,
...
bfd_mach_mcf5307, bfd_mach_mcf5407, bfd_mach_mcf528x,
bfd_mach_mcfv4e, bfd_mach_mcf521x, bfd_mach_mcf5249,
bfd_mach_mcf547x, bfd_mach_mcf548x): Remove.
(bfd_mach_mcf_isa_a, bfd_mach_mcf_isa_a_div,
bfd_mach_mcf_isa_a_div_mac, bfd_mach_mcf_isa_a_div_emac,
bfd_mach_mcf_isa_aplus, bfd_mach_mcf_isa_aplus_mac,
bfd_mach_mcf_isa_aplus_emac, bfd_mach_mcf_isa_aplus_usp,
bfd_mach_mcf_isa_aplus_usp_mac, bfd_mach_mcf_isa_aplus_usp_emac,
bfd_mach_mcf_isa_b, bfd_mach_mcf_isa_b_mac, bfd_mach_mcf_isa_b_emac,
bfd_mach_mcf_isa_b_usp_float, bfd_mach_mcf_isa_b_usp_float_mac,
bfd_mach_mcf_isa_b_usp_float_emac): New.
(bfd_default_scan): Update coldfire mapping.
* bfd/bfd-in.h (bfd_m68k_mach_to_features,
bfd_m68k_features_to_mach): Declare.
* bfd/bfd-in2.h: Rebuilt.
* bfd/cpu-m68k.c (arch_info_struct): Add new coldfire machines,
adjust legacy names.
(m68k_arch_features): New.
(bfd_m68k_mach_to_features,
bfd_m68k_features_to_mach): Define.
* bfd/elf32-m68k.c (elf32_m68k_object_p): New.
(elf32_m68k_merge_private_bfd_data): Merge the CF EF flags.
(elf32_m68k_print_private_bfd_data): Print the CF EF flags.
(elf_backend_object_p): Define.
* bfd/ieee.c (ieee_write_processor): Update coldfire machines.
* bfd/libbfd.h: Rebuilt.
* gas/config/tc-m68k.c (mcf5208_control_regs, mcf5213_control_regs,
mcf5329_control_regs): New.
(not_current_architecture, selected_arch, selected_cpu): New.
(m68k_archs, m68k_extensions): New.
(archs): Renamed to ...
(m68k_cpus): ... here. Adjust.
(n_arches): Remove.
(md_pseudo_table): Add arch and cpu directives.
(find_cf_chip, m68k_ip): Adjust table scanning.
(no_68851, no_68881): Remove.
(md_assemble): Lazily initialize.
(select_control_regs): Adjust cpu names. Add 5208, 5213, 5329.
(md_init_after_args): Move functionality to m68k_init_arch.
(mri_chip): Adjust table scanning.
(md_parse_option): Reimplement 'm' processing to add -march & -mcpu
options with saner parsing.
(m68k_lookup_cpu, m68k_set_arch, m68k_set_cpu, m68k_set_extension,
m68k_init_arch): New.
(s_m68k_cpu, s_m68k_arch): New.
(md_show_usage): Adjust.
(m68k_elf_final_processing): Set CF EF flags.
* gas/config/tc-m68k.h (m68k_init_after_args): Remove.
(tc_init_after_args): Remove.
* gas/doc/c-m68k.texi (M68K-Opts): Document -march, -mcpu options.
(M68k-Directives): Document .arch and .cpu directives.
* gas/testsuite/gas/m68k/all.exp: Add arch-cpu-1 test.
* gas/testsuite/gas/m68k/arch-cpu-1.[sd]: New.
* include/elf/m68k.h (EF_CPU32, EF_M68000, EF_CFV4E): Rename to ...
(EF_M68K_CPU32, EF_M68K_M68000, EF_M68K_CFV4E): ... here.
(EF_M68K_ISA_MASK, EF_M68K_ISA_A, EF_M68K_M68K_ISA_A_PLUS,
EF_M68K_ISA_B, EF_M68K_HW_DIV, EF_M68K_MAC_MASK, EF_M68K_MAC,
EF_M68K_EMAC, EF_M68K_USP, EF_M68K_FLOAT): New.
* include/opcode/m68k.h (m68008, m68ec030, m68882): Remove.
(m68k_mask): New.
(cpu_m68k, cpu_cf): New.
(mcf5200, mcf5206e, mcf521x, mcf5249, mcf528x, mcf5307, mcf5407,
mcf5470, mcf5480): Rename to cpu_<foo>. Add m680x0 variants.
* opcodes/m68k-dis.c (print_insn_m68k): Use
bfd_m68k_mach_to_features.
* binutils/readelf.c (get_machine_flags): Add logic for EF_M68K flags.
2006-02-07 19:01:10 +00:00
82cac98f3e
2006-01-31 Paul Brook <paul@codesourcery.com>
...
Richard Earnshaw <rearnsha@arm.com>
* gas/config/tc-arm.c: Use arm_feature_set.
(arm_ext_*, arm_arch_full, arm_arch_t2, arm_arch_none,
arm_cext_iwmmxt, arm_cext_xscale, arm_cext_maverick, fpu_fpa_ext_v1,
fpu_fpa_ext_v2, fpu_vfp_ext_v1xd, fpu_vfp_ext_v1, fpu_vfp_ext_v2):
New variables.
(insns): Use them.
(md_atof, opcode_select, opcode_select, md_assemble, md_assemble,
md_begin, arm_parse_extension, arm_parse_cpu, arm_parse_arch,
arm_parse_fpu, arm_parse_float_abi, aeabi_set_public_attributes,
s_arm_cpu, s_arm_arch, s_arm_fpu): Use macros for accessing CPU
feature flags.
(arm_legacy_option_table, arm_option_cpu_value_table): New types.
(arm_opts): Move old cpu/arch options from here...
(arm_legacy_opts): ... to here.
(md_parse_option): Search arm_legacy_opts.
(arm_cpus, arm_archs, arm_extensions, arm_fpus)
(arm_float_abis, arm_eabis): Make const.
* include/opcode/arm.h: Use ARM_CPU_FEATURE.
(ARM_AEXT_*, FPU_ENDIAN_PURE, FPU_VFP_HARD): New.
(arm_feature_set): Change to a structure.
(ARM_CPU_HAS_FEATURE, ARM_MERGE_FEATURE_SETS, ARM_CLEAR_FEATURE,
ARM_FEATURE): New macros.
2006-01-31 14:11:13 +00:00
1094df9f2d
* cris.h (MOVE_M_TO_PREG_OPCODE, MOVE_M_TO_PREG_ZBITS)
...
(MOVE_PC_INCR_OPCODE_PREFIX, MOVE_PC_INCR_OPCODE_SUFFIX): New macros.
(ADD_PC_INCR_OPCODE): Don't define.
2005-12-07 12:53:57 +00:00
466fc394b8
gas/
...
2005-12-06 H.J. Lu <hongjiu.lu@intel.com>
PR gas/1874
* config/tc-i386.c (match_template): Handle monitor.
(process_suffix): Likewise.
gas/testsuite/
2005-12-06 H.J. Lu <hongjiu.lu@intel.com>
PR gas/1874
* gas/i386/i386.exp: Add x86-64-prescott for 64bit.
* gas/i386/prescott.s: Test address size override for monitor.
* gas/i386/prescott.d: Updated.
* gas/i386/x86-64-prescott.d: New file.
* gas/i386/x86-64-prescott.s: Likewise.
include/opcode/
2005-12-06 H.J. Lu <hongjiu.lu@intel.com>
PR gas/1874
* i386.h (i386_optab): Add 64bit support for monitor and mwait.
opcodes/
2005-12-06 H.J. Lu <hongjiu.lu@intel.com>
PR gas/1874
* i386-dis.c (address_mode): New enum type.
(address_mode): New variable.
(mode_64bit): Removed.
(ckprefix): Updated to check address_mode instead of mode_64bit.
(prefix_name): Likewise.
(print_insn): Likewise.
(putop): Likewise.
(print_operand_value): Likewise.
(intel_operand_size): Likewise.
(OP_E): Likewise.
(OP_G): Likewise.
(set_op): Likewise.
(OP_REG): Likewise.
(OP_I): Likewise.
(OP_I64): Likewise.
(OP_OFF): Likewise.
(OP_OFF64): Likewise.
(ptr_reg): Likewise.
(OP_C): Likewise.
(SVME_Fixup): Likewise.
(print_insn): Set address_mode.
(PNI_Fixup): Add 64bit and address size override support for
monitor and mwait.
2005-12-06 12:40:57 +00:00
70c500b343
* mips.h: Assign 'm'/'M' codes to MIPS16e save/restore
...
instructions. Define MIPS16_ALL_ARGS and MIPS16_ALL_STATICS for
save/restore encoding of the args field.
* mips16-opc.c: Add MIPS16e save/restore opcodes.
* mips-dis.c (print_mips16_insn_arg): Handle printing of 'm'/'M'
codes for save/restore.
* config/tc-mips.c (mips16_ip): Add handling of 'm' and 'M' codes
for the MIPS16e save/restore instructions.
* gas/mips/mips.exp: Run new save/restore tests.
* gas/testsuite/gas/mips/mips16e-save.s: New test for generating
different styles of save/restore instructions.
* gas/testsuite/gas/mips/mips16e-save.d: New.
2005-11-14 02:25:39 +00:00
39e9e2b0c9
2005-10-28 Dave Brolley <brolley@redhat.com>
...
Contribute the following changes:
2003-09-29 Dave Brolley <brolley@redhat.com>
* dis-asm.h (disassemble_info): insn_sets now (void *) to allow for
more exotic underlying types to be used.
2005-10-28 19:41:01 +00:00
2f8b2203e3
2005-10-28 Dave Brolley <brolley@redhat.com>
...
Contribute the following changes:
2005-02-16 Dave Brolley <brolley@redhat.com>
* cgen-bitset.h: Rename CGEN_ISA_MASK to CGEN_BITSET. Rename
cgen_isa_mask_* to cgen_bitset_*.
* cgen.h: Likewise.
2005-10-28 19:38:59 +00:00
4aa1b05777
Add support for the Z80 processor family
2005-10-25 17:40:19 +00:00
95baaf8819
include/opcode/
...
2005-10-24 Jan Beulich <jbeulich@novell.com>
* ia64.h (enum ia64_opnd): Move memory operand out of set of
indirect operands.
bfd/
2005-10-24 Jan Beulich <jbeulich@novell.com>
* cpu-ia64-opc.c (elf64_ia64_operands): Move memory operand out of
set of indirect operands.
gas/
2005-10-24 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (enum reg_symbol): Delete IND_MEM.
(dot_rot): Change type of num_* variables. Check for positive count.
(ia64_optimize_expr): Re-structure.
(md_operand): Check for general register.
gas/testsuite/
2005-10-24 Jan Beulich <jbeulich@novell.com>
* gas/ia64/index.[sl]: New.
* gas/ia64/rotX.[sl]: New.
* gas/ia64/ia64.exp: Run new tests.
opcodes/
2005-10-24 Jan Beulich <jbeulich@novell.com>
* ia64-asmtab.c: Regenerate.
2005-10-24 07:42:50 +00:00
e68354936d
* hppa.h (pa_opcodes): Add two fcmp opcodes. Reorder ftest opcodes.
...
Add FLAG_STRICT to pa10 ftest opcode.
2005-10-16 20:42:14 +00:00
0e7712aeeb
* gas/hppa/basic/basic.exp (do_system): Adjust for removal of lha
...
instructions from system.s.
* gas/hppa/basic/system.s (lha): Remove.
* hppa.h (pa_opcodes): Remove lha entries.
2005-10-13 02:26:34 +00:00
Anthony Green
Nick Clifton
DJ Delorie
Alan Modra
Peter Bergner
Doug Evans
Joseph Myers
Thiemo Seufer
Catherine Moore
Chao-ying Fu
H.J. Lu
Eric Weddington
Adam Nemet
Andreas Krebbel
Paul Brook
Mark Shinwell
Ben Elliston
Nathan Sidwell
Martin Schwidefsky
Kazu Hirata
Michael Meissner
Richard Sandiford
Julian Brown
John David Anglin
Hans-Peter Nilsson
Dave Brolley
Jan Beulich