Go to file
John Baldwin 5ea36d92e6 Support hardware rate limiting (pacing) with TLS offload.
- Add a new send tag type for a send tag that supports both rate
  limiting (packet pacing) and TLS offload (mostly similar to D22669
  but adds a separate structure when allocating the new tag type).

- When allocating a send tag for TLS offload, check to see if the
  connection already has a pacing rate.  If so, allocate a tag that
  supports both rate limiting and TLS offload rather than a plain TLS
  offload tag.

- When setting an initial rate on an existing ifnet KTLS connection,
  set the rate in the TCP control block inp and then reset the TLS
  send tag (via ktls_output_eagain) to reallocate a TLS + ratelimit
  send tag.  This allocates the TLS send tag asynchronously from a
  task queue, so the TLS rate limit tag alloc is always sleepable.

- When modifying a rate on a connection using KTLS, look for a TLS
  send tag.  If the send tag is only a plain TLS send tag, assume we
  failed to allocate a TLS ratelimit tag (either during the
  TCP_TXTLS_ENABLE socket option, or during the send tag reset
  triggered by ktls_output_eagain) and ignore the new rate.  If the
  send tag is a ratelimit TLS send tag, change the rate on the TLS tag
  and leave the inp tag alone.

- Lock the inp lock when setting sb_tls_info for a socket send buffer
  so that the routines in tcp_ratelimit can safely dereference the
  pointer without needing to grab the socket buffer lock.

- Add an IFCAP_TXTLS_RTLMT capability flag and associated
  administrative controls in ifconfig(8).  TLS rate limit tags are
  only allocated if this capability is enabled.  Note that TLS offload
  (whether unlimited or rate limited) always requires IFCAP_TXTLS[46].

Reviewed by:	gallatin, hselasky
Relnotes:	yes
Sponsored by:	Netflix
Differential Revision:	https://reviews.freebsd.org/D26691
2022-07-11 11:52:46 +02:00
.github/workflows Cygwin: CI: Drop i686 builds 2022-05-16 13:36:51 +01:00
config Merge autoconf / automake update changes from GCC. 2022-01-17 04:30:37 -05:00
etc etc: switch to automake 2021-11-10 20:14:00 -05:00
include Sync with upstream gcc. 2016-06-23 15:54:55 -04:00
libgloss Use global atexit data for all configurations 2022-05-18 07:45:09 +02:00
newlib Support hardware rate limiting (pacing) with TLS offload. 2022-07-11 11:52:46 +02:00
texinfo * texinfo/texinfo.tex: Update to version 2009-03-28.05. 2009-04-21 12:36:46 +00:00
winsup Cygwin: console: Fix an issue which causes when realloc() fails. 2022-07-09 14:43:24 +09:00
.appveyor.yml Cygwin: CI: Drop i686 builds 2022-05-16 13:36:51 +01:00
.gitattributes Add .gitattributes 2015-03-09 20:53:11 +01:00
.gitignore Bump to autoconf 2.69 and automake 1.15.1 2022-01-12 07:05:02 -05:00
COPYING 2005-07-14 Kelley Cook <kcook@gcc.gnu.org> 2005-07-14 01:24:56 +00:00
COPYING.LIB Sync toplevel with upstream GCC. 2016-03-22 10:25:20 +01:00
COPYING.LIBGLOSS Update the address of the FSF in the copyright notice of files which were using the old address. 2021-11-10 20:14:00 -05:00
COPYING.NEWLIB newlib: drop phoenix support 2022-03-28 23:17:06 -04:00
COPYING3 * COPYING3: New file. Contains version 3 of the GNU General Public License. 2007-07-17 13:50:23 +00:00
COPYING3.LIB * COPYING3: New file. Contains version 3 of the GNU General Public License. 2007-07-17 13:50:23 +00:00
ChangeLog Update the address of the FSF in the copyright notice of files which were using the old address. 2021-11-10 20:14:00 -05:00
MAINTAINERS MAINTAINERS: clarify policy with config/ (and other top level files) 2012-05-12 03:10:17 +00:00
Makefile.def Sync with upstream gcc. 2016-06-23 15:54:55 -04:00
Makefile.in GCC: Pass --plugin to AR and RANLIB 2022-01-12 08:43:05 -05:00
Makefile.tpl GCC: Pass --plugin to AR and RANLIB 2022-01-12 08:43:05 -05:00
README 19990502 sourceware import 1999-05-03 07:29:06 +00:00
README-maintainer-mode Bump to autoconf 2.69 and automake 1.15.1 2022-01-12 07:05:02 -05:00
ar-lib Bump to autoconf 2.69 and automake 1.15.1 2022-01-12 07:05:02 -05:00
compile Sync toplevel with upstream GCC. 2016-03-22 10:25:20 +01:00
config-ml.in Sync toplevel with upstream GCC. 2016-03-22 10:25:20 +01:00
config.guess Bump config.guess and config.sub 2021-02-24 11:03:28 +01:00
config.rpath Remove freebsd1 from libtool.m4 macros and config.rpath. 2011-02-13 21:00:08 +00:00
config.sub Bump config.guess and config.sub 2021-02-24 11:03:28 +01:00
configure Add support for the haiku operating system. These are the os support patches we have been grooming and maintaining for quite a few years over on git.haiku-os.org. All of these architectures are working and most have been stable for quite some time. 2022-01-12 08:43:25 -05:00
configure.ac Add support for the haiku operating system. These are the os support patches we have been grooming and maintaining for quite a few years over on git.haiku-os.org. All of these architectures are working and most have been stable for quite some time. 2022-01-12 08:43:25 -05:00
depcomp Sync toplevel with upstream GCC. 2016-03-22 10:25:20 +01:00
djunpack.bat * djunpack.bat: Use ".." quoting in Sed command, for the sake of 2009-03-27 13:37:09 +00:00
install-sh Sync toplevel with upstream GCC. 2016-03-22 10:25:20 +01:00
libtool.m4 libtool.m4: fix nm BSD flag detection 2022-01-12 08:49:10 -05:00
ltgcc.m4 * libtool.m4: Update to libtool 2.2.6. 2008-09-29 15:28:14 +00:00
ltmain.sh PR target/59788 2014-02-05 13:17:47 +00:00
ltoptions.m4 Sync Libtool from GCC. 2010-01-09 21:11:32 +00:00
ltsugar.m4 * libtool.m4: Update to libtool 2.2.6. 2008-09-29 15:28:14 +00:00
ltversion.m4 Sync Libtool from GCC. 2010-01-09 21:11:32 +00:00
lt~obsolete.m4 Sync Libtool from GCC. 2010-01-09 21:11:32 +00:00
makefile.vms 19990502 sourceware import 1999-05-03 07:29:06 +00:00
missing Sync toplevel with upstream GCC. 2016-03-22 10:25:20 +01:00
mkdep Use remove-advertising-clause script to edit BSD licenses 2020-01-29 19:03:31 +01:00
mkinstalldirs Sync toplevel with upstream GCC. 2016-03-22 10:25:20 +01:00
move-if-change Sync toplevel with upstream GCC. 2016-03-22 10:25:20 +01:00
multilib.am Merge autoconf / automake update changes from GCC. 2022-01-17 04:30:37 -05:00
setup.com 2009-09-01 Tristan Gingold <gingold@adacore.com> 2009-09-01 13:38:26 +00:00
src-release * src-release (do-proto-toplevel): Support subdir-path-prefixed 2013-10-15 20:45:52 +00:00
symlink-tree 2005-07-14 Kelley Cook <kcook@gcc.gnu.org> 2005-07-14 01:24:56 +00:00
test-driver Bump to autoconf 2.69 and automake 1.15.1 2022-01-12 07:05:02 -05:00
ylwrap Sync toplevel with upstream GCC. 2016-03-22 10:25:20 +01:00

README

		   README for GNU development tools

This directory contains various GNU compilers, assemblers, linkers, 
debuggers, etc., plus their support routines, definitions, and documentation.

If you are receiving this as part of a GDB release, see the file gdb/README.
If with a binutils release, see binutils/README;  if with a libg++ release,
see libg++/README, etc.  That'll give you info about this
package -- supported targets, how to use it, how to report bugs, etc.

It is now possible to automatically configure and build a variety of
tools with one command.  To build all of the tools contained herein,
run the ``configure'' script here, e.g.:

	./configure 
	make

To install them (by default in /usr/local/bin, /usr/local/lib, etc),
then do:
	make install

(If the configure script can't determine your type of computer, give it
the name as an argument, for instance ``./configure sun4''.  You can
use the script ``config.sub'' to test whether a name is recognized; if
it is, config.sub translates it to a triplet specifying CPU, vendor,
and OS.)

If you have more than one compiler on your system, it is often best to
explicitly set CC in the environment before running configure, and to
also set CC when running make.  For example (assuming sh/bash/ksh):

	CC=gcc ./configure
	make

A similar example using csh:

	setenv CC gcc
	./configure
	make

Much of the code and documentation enclosed is copyright by
the Free Software Foundation, Inc.  See the file COPYING or
COPYING.LIB in the various directories, for a description of the
GNU General Public License terms under which you can copy the files.

REPORTING BUGS: Again, see gdb/README, binutils/README, etc., for info
on where and how to report problems.