acadia/sys/denali/ahci/ahci_device.cpp

#include "ahci/ahci_device.h"

#include <glacier/status/error.h>
#include <mammoth/util/debug.h>
#include <zcall.h>

AhciDevice::AhciDevice(AhciPort* port) : port_struct_(port) {
  if ((port_struct_->sata_status & 0x103) != 0x103) {
    return;
  }

  // 0x0-0x400 -> Command List
  // 0x400-0x500 -> Received FIS
  // 0x500-0x2500 -> Command Tables (0x100 each) (Max PRDT Length is 8 for now)
  uint64_t paddr;
  command_structures_ =
      mmth::OwnedMemoryRegion::ContiguousPhysical(0x2500, &paddr);

  command_list_ = reinterpret_cast<CommandList*>(command_structures_.vaddr());
  port_struct_->command_list_base = paddr;

  received_fis_ =
      reinterpret_cast<ReceivedFis*>(command_structures_.vaddr() + 0x400);
  port_struct_->fis_base = paddr + 0x400;

  command_tables_ =
      reinterpret_cast<CommandTable*>(command_structures_.vaddr() + 0x500);

  for (uint64_t i = 0; i < 32; i++) {
    command_list_->command_headers[i].command_table_base_addr =
        (paddr + 0x500) + (0x100 * i);
  }
  port_struct_->interrupt_enable = 0xFFFFFFFF;
  // Reset the CMD and FRE bits since we move these structures.
  // FIXME: I think we need to poll these bits to make sure they become
  // 0 before setting them back to one.
  port_struct_->command &= ~(0x00000011);
  port_struct_->command |= 0x00000011;
}

glcr::ErrorCode AhciDevice::IssueCommand(Command* command) {
  command->PopulateFis(command_tables_->command_fis);
  command->PopulatePrdt(command_tables_->prdt);

  command_list_->command_headers[0].command =
      (sizeof(HostToDeviceRegisterFis) / 2) & 0x1F;
  command_list_->command_headers[0].prd_table_length = 1;
  command_list_->command_headers[0].prd_byte_count = 0;

  commands_[0] = command;

  commands_issued_ |= 1;
  port_struct_->command_issue |= 1;

  return glcr::OK;
}

void AhciDevice::DumpInfo() {
  dbgln("Comlist: {x}", port_struct_->command_list_base);
  dbgln("FIS: {x}", port_struct_->fis_base);
  dbgln("Command: {x}", port_struct_->command);
  dbgln("Signature: {x}", port_struct_->signature);
  dbgln("SATA status: {x}", port_struct_->sata_status);
  dbgln("Int status: {x}", port_struct_->interrupt_status);
  dbgln("Int enable: {x}", port_struct_->interrupt_enable);

  // Just dump one command info for now.
  for (uint64_t i = 0; i < 32; i++) {
    dbgln("Command Header: {}", i);
    dbgln("Command {x}", command_list_->command_headers[i].command);
    dbgln("PRD Len: {x}", command_list_->command_headers[i].prd_table_length);
    dbgln("Command Table {x}",
          command_list_->command_headers[i].command_table_base_addr);
  }
}

void AhciDevice::HandleIrq() {
  uint32_t int_status = port_struct_->interrupt_status;
  // FIXME: Probably only clear the interrupts we know how to handle.
  port_struct_->interrupt_status = int_status;

  uint32_t commands_finished = commands_issued_ & ~port_struct_->command_issue;

  // FIXME: Pass error codes to the callback.
  for (uint64_t i = 0; i < 32; i++) {
    if (commands_finished & (1 << i)) {
      commands_issued_ &= ~(1 << i);
      commands_[i]->SignalComplete();
    }
  }

  // TODO: Do something with this information.
  if (int_status & 0x1) {
    // Device to host.
    DeviceToHostRegisterFis& fis = received_fis_->device_to_host_register_fis;
    if (fis.fis_type != FIS_TYPE_REG_D2H) {
      dbgln("BAD FIS TYPE (exp,act): {x}, {x}",
            static_cast<uint64_t>(FIS_TYPE_REG_D2H),
            static_cast<uint64_t>(fis.fis_type));
      return;
    }
    if (fis.error) {
      dbgln("D2H err: {x}", fis.error);
      dbgln("status: {x}", fis.status);
    }
  }
  if (int_status & 0x2) {
    // PIO.
    PioSetupFis& fis = received_fis_->pio_set_fis;
    if (fis.fis_type != FIS_TYPE_PIO_SETUP) {
      dbgln("BAD FIS TYPE (exp,act): {x}, {x}",
            static_cast<uint64_t>(FIS_TYPE_PIO_SETUP),
            static_cast<uint64_t>(fis.fis_type));
      return;
    }
    if (fis.error) {
      dbgln("PIO err: {x}", fis.error);
    }
  }
}